Model NO.: SH-DW
Material: Galvanized Steel
Material Thickness: 0.4-1.2mm
Roller Shaft Diameter: 68mm
Control System: PLC with Touch Screen
Roller Stations: 9 Stations
Way of Drive: Chain
Main Motor Power: 5.5kw
Power Supply: 380V, 50Hz, 3phase
Forming Speed: 12-- 15m/Min
Hydraulic Cutting Power: 4kw
Trademark: Suhang
Transport Package: Standard Package with Film, Plastic and Steel Wire
Specification: 3000mm*500mm* 800mm
Origin: Wuxi, Jiangsu
HS Code: 8455229090
Model NO.: SH-DW
Material: Galvanized Steel
Material Thickness: 0.4-1.2mm
Roller Shaft Diameter: 68mm
Control System: PLC with Touch Screen
Roller Stations: 9 Stations
Way of Drive: Chain
Main Motor Power: 5.5kw
Power Supply: 380V, 50Hz, 3phase
Forming Speed: 12-- 15m/Min
Hydraulic Cutting Power: 4kw
Trademark: Suhang
Transport Package: Standard Package with Film, Plastic and Steel Wire
Specification: 3000mm*500mm* 800mm
Origin: Wuxi, Jiangsu
HS Code: 8455229090
                               Wall angle channel roll forming machine

1.  Technical Parameter
 
  Items Specifications
Material of coil Material Thickness 0.4-1.2 mm 
De-coiler Weight 3 ton manual
Forming system Rolling Speed 12--15m/min
Roller Stations About 9 stations forming
Roller Material Gcr15 Steel with quenching
Shaft Material 45# Steel Diameter 75mm shaft
Maim Motor Power 5.5 kw
Hydraulic cutting Power 4 kw
Cutting
system		 Material Of Cutting CR12 with quench treatment
Hardness HRC58-62
Tolerance +-0.5mm
Cutting blade 1 set of cutting blade
Electrical control system Electric Source 380V, 50HZ,3 phase (or customized)
 
Control System PLC with touch screen
  Weight About 3.5 tons
  Way Of Drive 1 inch single chain
  Size of machine 3000mm*500mm* 800mm
 
 
 
2.   Main Components
 
Machine list 3 ton passive de-coiler 1 set
Feeding with guide 1 set
Main roll forming machine 1 set
PLC Control system 1 unit
Hydraulic station 1 unit
Stop cutting device 1 unit
Safety cover 1 unit
Out table 2 units



3. Working Flow of Roll Forming Machine
 
 De-coiler-→Level device -→Main roll forming machine-→Hydraulic cutting-→ Run out table

A. Passive Decoiler..........................................................To load and uncoiling material
(We also have Electric Decoiler and Hydraulic Decoiler to hold the heavy material.)

B. Servo Feeding Applicator............................................To feed the material accurately

C. Hydraulic/Press Punching...........................................To punch as requirements

D. Roll Forming Unit.........................................................To roll form as requirements

E. Hydraulic Cutting.........................................................To cut sheets as desired length
(We also have non-stop hydraulic cutting system.)

F. Output Table................................................................Support the finished products



4. Advantage for  Roll Forming Machine

1. Reasonable Price
2. High Quality
3. 12 Months Warranty
4. More Than 10 Years Experience
5. Durable
6. Reliable
   During the warranty period, maintain and change the spare parts for the customers for free (except for the instrument damage caused by human factors or natural disasters. ) And provide technical support for life-long.
   We can design and manufacture the machine according to clients' request! Our machines have passed CE, Guaranteed quality. Please send us the enquiry with Profile Drawing.



5.  After-sale Serive

   - The seller take responsibility to installation and commissioning of the equipment and free training. After machine arrive the destination, by the request of the buyer , the seller will provide 1 technical engineer to guide installation and training , and the buyer should give the technical person with full cooperated.
   - Installation period: about 5 days after the complete preparation by the buyer such as the foundation and all necessary accessories.
  - Training time: 5 days.
  - Before departure of the engineers from seller, the buyer should pay for installation and commissioning fee 100$/day to the point account of the seller. The two-way ticket,visa, food, hotel , the translator and insurance are all should provide by buyer with full responsibility.
  -The seller supply technical data (including forming mould drawing, electrical elements drawing and equipment drawing etc.)



6.  Company Profile

    Wuxi Suhang Machinery manufacturing Co., Ltd. is specialized in building materials of light steel structure. Since the factory founded 10 years before, it always designs and produces various type profile
of roll forming machine.
     The main products of factory is Roller shutter door, PU sandwish panel line, pre-painted steel forming machine, Racking roll forming machine, the cable tray roll forming machine, Glazed Tile forming machine, Automatical C/Z Purlin forming machine, Floor Deck forming machine, Guardrail forming machine, Down
Pipe forming machine, the whole carriage plate for car beam unit, Steel storage unit, etc. The products
are widely used in warehouse, factory buildings, supermarket, Nursing homes, villas and other
construction projects,  Our factory can meet the construction enterprises, automobile industry, Iron and
steel production enterprises' growing demands.
      Suhang machinery is located in Wuxi city, Jiangsu province which is close to Shanghai,  It's about half an hour's journey. We enojoy the convenient transportation and advantageous location which supply good business opportunities for the buyers home and abroad.
                                 Wall angle channel roll forming machine

1.  Technical Parameter
 
  Items Specifications
Material of coil Material Thickness 0.4-1.2 mm 
De-coiler Weight 3 ton manual
Forming system Rolling Speed 12--15m/min
Roller Stations About 9 stations forming
Roller Material Gcr15 Steel with quenching
Shaft Material 45# Steel Diameter 75mm shaft
Maim Motor Power 5.5 kw
Hydraulic cutting Power 4 kw
Cutting
system		 Material Of Cutting CR12 with quench treatment
Hardness HRC58-62
Tolerance +-0.5mm
Cutting blade 1 set of cutting blade
Electrical control system Electric Source 380V, 50HZ,3 phase (or customized)
 
Control System PLC with touch screen
  Weight About 3.5 tons
  Way Of Drive 1 inch single chain
  Size of machine 3000mm*500mm* 800mm
 
 
 
2.   Main Components
 
Machine list 3 ton passive de-coiler 1 set
Feeding with guide 1 set
Main roll forming machine 1 set
PLC Control system 1 unit
Hydraulic station 1 unit
Stop cutting device 1 unit
Safety cover 1 unit
Out table 2 units



3. Working Flow of Roll Forming Machine
 
 De-coiler-→Level device -→Main roll forming machine-→Hydraulic cutting-→ Run out table

A. Passive Decoiler..........................................................To load and uncoiling material
(We also have Electric Decoiler and Hydraulic Decoiler to hold the heavy material.)

B. Servo Feeding Applicator............................................To feed the material accurately

C. Hydraulic/Press Punching...........................................To punch as requirements

D. Roll Forming Unit.........................................................To roll form as requirements

E. Hydraulic Cutting.........................................................To cut sheets as desired length
(We also have non-stop hydraulic cutting system.)

F. Output Table................................................................Support the finished products



4. Advantage for  Roll Forming Machine

1. Reasonable Price
2. High Quality
3. 12 Months Warranty
4. More Than 10 Years Experience
5. Durable
6. Reliable
   During the warranty period, maintain and change the spare parts for the customers for free (except for the instrument damage caused by human factors or natural disasters. ) And provide technical support for life-long.
   We can design and manufacture the machine according to clients' request! Our machines have passed CE, Guaranteed quality. Please send us the enquiry with Profile Drawing.



5.  After-sale Serive

   - The seller take responsibility to installation and commissioning of the equipment and free training. After machine arrive the destination, by the request of the buyer , the seller will provide 1 technical engineer to guide installation and training , and the buyer should give the technical person with full cooperated.
   - Installation period: about 5 days after the complete preparation by the buyer such as the foundation and all necessary accessories.
  - Training time: 5 days.
  - Before departure of the engineers from seller, the buyer should pay for installation and commissioning fee 100$/day to the point account of the seller. The two-way ticket,visa, food, hotel , the translator and insurance are all should provide by buyer with full responsibility.
  -The seller supply technical data (including forming mould drawing, electrical elements drawing and equipment drawing etc.)



6.  Company Profile

    Wuxi Suhang Machinery manufacturing Co., Ltd. is specialized in building materials of light steel structure. Since the factory founded 10 years before, it always designs and produces various type profile
of roll forming machine.
     The main products of factory is Roller shutter door, PU sandwish panel line, pre-painted steel forming machine, Racking roll forming machine, the cable tray roll forming machine, Glazed Tile forming machine, Automatical C/Z Purlin forming machine, Floor Deck forming machine, Guardrail forming machine, Down
Pipe forming machine, the whole carriage plate for car beam unit, Steel storage unit, etc. The products
are widely used in warehouse, factory buildings, supermarket, Nursing homes, villas and other
construction projects,  Our factory can meet the construction enterprises, automobile industry, Iron and
steel production enterprises' growing demands.
      Suhang machinery is located in Wuxi city, Jiangsu province which is close to Shanghai,  It's about half an hour's journey. We enojoy the convenient transportation and advantageous location which supply good business opportunities for the buyers home and abroad.
 

Copper Plating Welding Wire

Features:

ER70S-6 is a kind of mild steel copper coated Welding wire, suitable for 100% CO2 and Argon& CO2 mixed gas protective welding with stable feasibility, good welding seams, less spatters and excellent welding process properties.


Application:

Used to weld ship building steel(A,B,D,E,A36,D36,E36)and equivalent mild steel or 550Mpa grade mild alloy steel, such as container building, construction machine, railway construction, pressure vessel for semi-auto or automatic gas shielded welding.

1. Wire into the plant must be stored in dry conditions, can not open welding wire coil waterproof packaging.
2. Welding shall be removed before welding surface oil, rust, water and other impurities.
3. The CO2 gas protection, CO2 gas purity 99.98%.
4. CO2 welding protective gas flow rate should be controlled at 20~25L/min.
5. Wire extension length should be controlled in the range of 15~25mm.


Copper Plating Welding Wire ,Mig Welding Copper Wire,Copper Plating Wire,Copper Plating Welding Wires

Jiangyin Vankey Machinery Technology Co.,Ltd , https://www.wkweldingwire.com