Graphite Rod
Graphite rod is widely used in national defense, electronics, machinery, metallurgy, chemical industry, light industry, casting, nonferrous alloy, medicine, environmental protection sewage treatment and other fields.
Graphite rod is normally used in high temperature vacuum furnace as heating body, The operating temperature can reach 3000℃, and graphite rod is easy oxidation at high temperature, in addition to vacuum,graphite rod mold can only be used in neutral atmosphere or reductive atmosphere.
Mishan Graphite Mold factory can custom all different types of Graphite Mould, graphite heater,graphite die, graphite ingot mold, Graphite Plate,Graphite Crucible,etc. Contact us for more information.
Graphite Rod,Carbon Graphite Rod,Expert Graphite Rod,Carbon Electrode Rods Huixian City Mishan Graphite Jip Co., Ltd. , https://www.msgraphitemold.com
Traditional solid-liquid separation technology is divided into mechanical filtration separation and thermal drying separation. There is a certain separation limit for mechanical filtration and separation. If it exceeds the limit, it must be separated by mechanical filtration and then subjected to thermal drying and separation. The thermal drying separation is a high-energy-consuming operation with high investment and operating costs. In contrast, the hot-press filtration drying dehydration technology is a crossover technology that combines mechanical filtration with thermal drying. The entire process of forming a continuous filter cake and hot-pressing separation on a single drying filter press can be omitted. The thermal drying operation separates the suspension into clarified water and dry powdered materials at one time, which has the technical advantages of energy saving, high efficiency and environmental protection.
Taking high-grade pearlescent pigments exported from Langfang Ouke Fine Chemicals Co., Ltd. as an example, the solid-liquid separation operation of finished products was originally vacuum filtered for 4 hours. The water content of filter cake was 40%, and then it was dried in the drying room for 11 hours to reach the finished product requirements. . The use of hot-pressure filter drying dehydration technology, only takes 40 minutes, filter cake moisture 15%, and then into the drying room to dry 1 hour to reach the finished product requirements, production efficiency increased by more than 60%.
Recently, it was successfully developed by Langfang Aoke Fine Chemical Co., Ltd., which was developed by Hebei Tangshan Intelligent Special Equipment Co., Ltd. and has independent intellectual property rights in China. The industry believes that this technology will change the strict boundaries of traditional mechanical filtration separation and thermal drying separation in the chemical industry, change the relevant production process, reduce costs, and increase production efficiency.