Air compressor intake is adjusted by opening and closing of a regulating valve

The screw compressor mainly consists of a compressor head, a motor, an air cooler, an oil cooler, an oil and gas separator, and a computer control panel. The air compressor intake is adjusted by the opening and closing of a regulating valve, and the air is compressed and discharged to the outlet through the tooth meshing rotation between the main and auxiliary rotors, and the mixed gas containing the lubricating oil enters the oil separator. After separation, the clean compressed air and lubricating oil are divided into two ways: one way compressed air is cooled by the cooler, and then enters the drying tower through the pipeline, and the purified air enters the production device; the other lubricating oil is cooled by the oil cooler and then passed through the oil. After the filter is filtered, it is returned to the compressor for recycling.

The main features of the air compressor are: simple structure, stable exhaust pressure, easy adjustment of exhaust volume, low noise, low energy consumption and advanced control methods. Due to the good technical performance of the machine, the self-control detection is reliable and the maintenance amount is small. During the use process, special attention should be paid to maintenance, and the fault should be eliminated in time according to the alarm signal on the display. Because our factory is located in the desert zone, when the wind season comes, the sand and dust in the air are easily brought into the air compressor inlet, causing the inlet air filter to block the alarm. At the most frequent times, the inlet filter must be cleaned every few days.

A rectangular parallelepiped frame was made at the inlet of the air compressor, and the outer surface was made of a non-woven fabric. In order not to affect the inlet air volume, the surface area is many times that of the original inlet. High exhaust gas temperature: The water quality of the cooling water is poor, and the air cooler and the oil cooler are clogged, resulting in poor heat transfer. Regularly clean the core of the air cooler and oil cooler, purge the cooling system process pipeline; and strengthen the circulating water quality treatment. Oil filter clogging alarm Cause: Dust is brought into the machine and the engine oil mixes, resulting in oil containing more impurities.

Plastic Honeycomb Panel with Non-woven Surface

Honeycomb Panel,Non woven honeycomb panel,Plastic Honeycomb Panel

YANGZHOU MAXTONE COMPOSITE CO.,LTD. , https://www.maxtonetruckbody.com