SP 15 and SP 25 are an innovative special equipment for concrete slipform paving that is characterized by high economics, high productivity and many new practical functions. SP 15: All-rounder paving high quality concrete structures of various shapes The SP 15 is used in a wide range of applications. It can be used for road panel blocks up to 1.8 m in width, anti-collision walls up to 1.3 m in height, and side-span applications for all concrete structures in this range. Medium is unique, including concrete structures with different geometries and different cross sections: curbs, sinks, channels, drains, cable troughs, reinforced concrete safety barriers and special structures. The SP 15 can also be used for small road construction, such as trails, bicycle lanes and country road trunks, complementing the range of pavers. Slipform paving for concrete structures of all shapes and sizes: SP 15 for fast and precise paving SP 25: Unmatched application of concrete paving The SP 25's wide range of applications is equally impressive: when paving in the upright mode, the SP 25 can be paved from 1 to 3.5 meters wide and up to 40 cm thick, regardless of open or tunnel construction. . When using the side-seat mode, the SP 25 can be built with safety rails up to 2.0 meters in height, as well as curbs, ditches, sinks, shoulders and concrete lanes or bicycle lanes up to 2.5 meters wide. Configuration options for a variety of applications The flexible paving stencil, track mechanism and conveying equipment make the SP 15 and SP 25 highly flexible and versatile, which also ensures high machine utilization. The SP 15 is equipped with three crawler mechanisms (two in front and one in the back). The SP 25 comes standard with three track walking mechanisms (the latter two, the front one), and four track walking mechanisms are also available. The paving mold can be placed on the left or right side of the machine as needed, and the hydraulically operated telescoping mechanism allows the mold to be telescoped to the desired lateral position, allowing the mold to be placed inside or outside the machine. In this way, concrete pavers and concrete mixer trucks can move smoothly along the direction of the lane without the need for a U-turn or reverse driving pose a safety risk. The telescopic suspension (mechanical or hydraulic) allows the mold to be telescoped to the desired lateral position for structural paving operations. In the case where the slipform paver is not able to travel close to the structure to be paved, the SP 15 can extend the mold outward by 0.7 meters, and the SP 25 can extend the mold outward by 1.1 meters. When using smaller molds, the mold height adjustment device can be selected for adjustments up to 40 cm. The mold can be accurately installed according to the construction needs without time and effort. The height of the slipform paver can be further adjusted by the crawler walking system. Flexible concrete feeding for a wide range of operating conditions The concrete feed during slipform paving is achieved by standard delivery belts, and the user can also choose a foldable conveyor belt or a screw conveyor. From the control panel of the paver, the tilting, deflection and lateral and longitudinal displacement of the conveyor can be adjusted flexibly through the hydraulic system. Even at small construction sites, the feed system can be adjusted to the optimum angle and position to ensure uninterrupted concrete feed for daily high throughput. Save a lot of time: mold quick change device In slipform paving operations, especially small slipform pavers, different structures need to be paved on the same day or even on the same site. The new optional Wirtgen mold changer allows for in-place mold change, allowing customers to save time and flexibility to complete different construction tasks. The hydraulic mold quick change device is easy to operate, the machine lowers the machine, aligns the prepared mold, and moves the machine slightly forward to make the hook hook the mold lock. The mold can be locked with hydraulics at the push of a button. Get the ideal paving foundation with the leveler Both slipform pavers are available with an optional leveler. The screed is equipped with helically arranged cutter heads to provide precise preparation for uniform paving of the concrete. Through the hydraulic cylinder, the screed in the front section of the mold can be adjusted in height and inclination angle and can be laterally stretched. The planer has a milling depth of up to 150 mm and an adjustable milling width, which can be gradually widened from a basic width of 600 mm and a maximum width of 1,600 mm. Reduce fuel costs: economic mode to achieve energy-saving control of diesel engines Thanks to the intelligent electronic control system used in the slipform paver, the engine is always in the optimum performance and torque range. The economic model allows the equipment to automatically reduce engine power to the most favorable range during the construction site waiting time, which not only saves fuel significantly, but also reduces noise, improves equipment operator comfort and reduces environmental impact. The SP 15 is equipped with a four-cylinder diesel engine rated at 92 kW / 125 hp at 2,100 rpm. The SP 25 is equipped with a six-cylinder diesel engine with a power of 118 kW / 160.4 hp. Thanks to the engine's power, the pavers have a paving and walking speed of 15 and 35 meters per minute, respectively, which is better than the older models SP 150 and SP 250. Accurate Wirtgen control system for all working conditions The Wirtgen control system provides precise control of the paving thickness to ensure that the shape and level of the concrete structure meets the design requirements. The standard automatic leveling system includes a cross-slope sensor, two elevation sensors and two steering sensors, as well as an optional 3D wireless kit. The standard 3D interface can run all kinds of 3D systems that are common on the market. The SP 25 is also available with a choice of a third set of elevation and steering sensors for a very small turning radius slipform paving. The versatile modular design allows the Wirtgen leveling system to offer customers maximum flexibility to work with the baseline, as well as 3D wireless control systems or AutoPilot automated navigation systems. (This article is from Wirtgen) Pipe Roller,Conveyor Roller,Plastic Injection Steel Molding,Plastic Mold Roller Yangzhou Donglun Industrial Equipment Co., Ltd , https://www.dltubemill.com
