Vertical Ribbon Mixer with Double Speed Motor

Model NO.: GPH

Layout Type: Horizontal

Mixing Drum Shape: Drum

Additional Capabilities: Drying

Operating type: Cycle Operating

Model: Wldh

Construction Material: SUS316L

Export Markets: Global

Delivery Time: 15-60days

Trademark: shuanglong

Specification: CE, ISO9001

Origin: China

HS Code: 84798200
Introduction:
Ribbon Mixer is primarily designed for use with dry materials, although gas and liquid streams can also be added. A wide variety of configurations, for either batch or continuous mixing, are available with sizes ranging from 100-20000 liter working capacity. Application specific rotor mixing element design allows shorter batch cycle times due to increased mixing efficiency. We can customize the design of the Ribbon Mixer to meet your specific mixing requirements. Mixing vessels can be standard U-shape or cylindrical depending on internal pressure or vacuum requirements.

Working Principle:
Ribbon mixer consists of transmission parts, double ribbon agitators and U-shape cylinder. In the direction of rotation, the outer ribbon pushes materials from both ends to the middle, while the inner ribbon pushes materials from the middle to both ends. Ribbon wind with different angle direction carries the materials flowing in different directions. Through continuous convective circulation, the materials are sheared and mixed thoroughly and quickly.

Features:
1)High mixing precision

2)Good sealing, easy cleaning

3)Short batch mixing time

4) Small size ensures installation convenience

5) Materials: Carbon steel, stainless steel

6) Main shaft seal: Stuffing seal and air purge seal

7) Large amount of loading

8)Delivery time: 15--40 days, Pay term: FOB, CIF

Datasheet:

Model Project All volume
(M3) Loads coefficient Electrical machiney power
(KW) Size(mm)Ã— Max-diameter Ã—High Equipment weight (kg)

WLDH-0.1 0.1 0.4-0.6 3 1190Ã—740Ã—770 330

WLDH-0.3 0.3 0.4-0.6 4 2030Ã—630Ã—980 720

WLDH-0.5 0.5 0.4-0.6 7.5 2320Ã—730Ã—1130 980

WLDH-1 1 0.4-0.6 11 2800Ã—920Ã—1320 1700

WLDH-1.5 1.5 0.4-0.6 11 3180Ã—1020Ã—1550 1800

WLDH-2 2 0.4-0.6 15 3310Ã—1120Ã—1640 2100

WLDH-3 3 0.4-0.6 18.5 3750Ã—1290Ã—1820 3000

WLDH-4 4 0.4-0.6 22 4220Ã—1400Ã—1990 3980

WLDH-5 5 0.4-0.6 22 4220Ã—1500Ã—2100 4620

WLDH-6 6 0.4-0.6 30 4700Ã—1610Ã—2260 6180

WLDH-8 8 0.4-0.6 37 4420Ã—2150Ã—2470 8200

WLDH-10 10 0.4-0.6 45 5520Ã—2960Ã—2720 8920

WLDH-12 12 0.4-0.6 45 5720Ã—3010Ã—2840 9520

WLDH-15 15 0.4-0.6 55 5840Ã—3540Ã—2940 9950

1.Â Â Â Â Working volume is calculated when material bulk density @1;
2.Â Â Â Â Changes are available according to customer's special requirement;
3. Â Â Shuang Long Group might develop new data which is not modified timely on the Web.

Typical Processed Material We've done before:
Â
Animal Feed Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Baby Food
Flavoring Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Milk Powder
Bakery premixes Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Dried food products
Engineered plastic resins Â Â Â Â Â Â Â Â Â Â Pesticides and herbicides
Epoxy resinsÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Pharmaceuticals
FertilizersÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Plastic powders
Carbon blackÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Fire retardants
PolyethyleneÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Chemicals
PVC compounding Â Â Â Â Â Â Â Â Â Â Â Â Â Â Cleaning compounds
Talcum powders Â Â Â Â Â Â Â Â Â Â Â Â Â Â Laundry detergents

Â Â Â
Â Â Â Â Â Â
Stainless Steel Forging
One of the biggest features of forging is that it can change the metal structure and improve the mechanical properties of the metal. Therefore, generally forged parts are used on parts with relatively high strength and toughness requirements or severe working conditions. The stainless steel forgings can be used in some places with high rust and corrosion resistance requirements or particularly harsh working environments. Due to the characteristics of the forging process, forging is not suitable for machining workpieces with particularly complex shapes, and for some places with fine holes or fine grooves, forging cannot be achieved, but it can be achieved by subsequent precision CNC machining.

Due to the characteristics of the forging process, the forging processing is often matched with the subsequent secondary precision CNC processing. SCZY has independent mold design and production, forging processing and precision CNC machining departments, which can be well coordinated to achieve the best results.

Stainless Steel Forgings,Stainless Steel Forging Parts,Stainless Steel Forged,High Stainless Steel Brass Hot Forging,Stainless Steel Forging Process
Shenzhen SCZY Technology Co.,Ltd , https://www.szsczycasting.com