Model NO.: ZJA-300T transformer oil treatment plant
Trademark: LS oil purification plant
Origin: China
HS Code: 8421299090
ZJA-T Series Double-Stage Vacuum Oil Purifier for Ultra-high Voltage Transformers
 
Application
ZJA-T series are especially applied to 500KV, 750KV and 1000KV AC power grid and ±660KV, ±800KV DC power grid for the insulating oil treatment and maintenance. ZJA-T machine is very powerful in abilities of vacuum degassing, dehydration and filtration for insulating oil or transformer oil. It applies to on-site transformer maintenance and deep purification of new transformer oil, imported transformer oil oil, mutual inductor oil and ultra high voltage transformer oil. It can also be used for transformer oil vacuum filling and vacuum drying operation.
 
Advantages
Advanced double-stage large capacity dehydration and degassing system which adopts large area three-dimensional flash evaporation technique to remove harmful composition in the oil such as water, air,gas and hydrocarbon etc.
It can be widely used for transformers on-site installation or maintenance to fill oil into transformers and circuit breakers under vacuum condition or conduct transformers evacuation operation.
Precise filtration system, high-quality filtering elements and multi-stage filtration with gradual precision can help to remove mechanical impurities from the oil effectively. While the filters are with self-inspection function for the pollutant-containing conditions.
Equipped with automatic temperature control system, liquid-level control system, defoaming control system, pressure protection system and high quality main components to ensure operation of the equipment with high reliability and perfect performance.
The machine supports on-line operation without supervision with indicators to show operation status.
The machine adopts humanization design with low noise, easy operation, long free-maintenance time and energy saving to lower the operation cost.
With electrical control inter-lock design. Vacuum system, oil pump system and heating system are interlocked in control.
Equipped with indication for changing filters and automatic stop device for overloaded filters.
Equipped with emergency stop for electric leakage and power overload to protect the motor.
With phase-sequence, phase lose protection function and safety control for sudden shut-down.
Equipped with vacuuming interface for transformer evacuation operation.
The outlet can inlet can be interchanged.
Optional Customized Design as per Client's Requirements:
PLC intelligent control with touch screen operation and operation status dynamic display.
Online moisture tester, online particle counter and online flow meter with adding-up function.
Frequency converter for free adjustment of flow rate
The whole structure of the machine: mobiles style with four wheels, fixed style, mobile style with trailer(double axles or single axle), fully enclosed style, conceal eaves type and open style of canvas etc.
 
 
 
 
Technical Specification
Item Unit ZJA-100T ZJA-150T ZJA-200T ZJA-300T ZJA-400T ZJA-500T
Flow rate L/H  
6000
 		 9000 12000 18000 24000 30000
Limit Vacuum Degree Pa   ≤2
Operating Vacuum Degree Pa   ≤30
Working Pressure Mpa   ≤0.5
Temperature Range ºC   20-80
Power Supply V/HZ   380V/50HZ(or at user's option)
Working Noise dB(A)   ≤70
Total Power kW 60+6 90+10 120+10 135+15 180+15 240+35
Pipeline Diameter mm 40 50 50 65 65 80
Net Weight kg 1600 2400 2500 3800 4000 4500
Overall Dimensions(L×W×H) cm 270×160×230 310×190×250 310×190×250 340×200×250 340×210×250 350×210×250
Oil Quality After Treatment
Breakdown Voltage KV ≥75(GB/T50T)
Water Content PPm ≤3(GB/T7600)
Gas Content % ≤0.1(GB/T423)
Filtration Precision μm ≤1
Ethyne % 0
The dimensions and weight are just for reference and specific please in kind prevail.
 
 

Pipe Cutting Machine

A pipe cutting machine shear, historically known as a lever shear and sometimes as a crocodile shear, is a metal-cutting shear with a hinged jaw, powered by a flywheel or hydraulic cylinder. Alligator shears are generally set up as stand-alone shears; however, there are types for excavators. They are generally used to cut ferrous members, such as rebar, pipe, angle iron, or I-beams.

Aluminum Pipes Shear, Steel Pipes Shear, Iron Pipes Shear, Metal Pipes Shear, Copper Pipes Shear

Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.ecometalsrecycle.com