The machine does not operate normally after the encoder's backup battery is exhausted and the encoder's backup battery is powered down or lost. In this case, it is necessary to re-set the reference point or the origin to correct the coaxiality. The spindle of the machine tool is moved to the proper position so that the spindle of the machine tool is coaxial with the corresponding drill sleeve. That is to find the position of the workpiece processing part. The method of correcting the coaxiality will be connected to the M port of the machine as follows. In this mode, the corresponding axis mode can be selected to jog the machine, and the speed of the jog machine can be adjusted by the magnification. Insert the special measuring tool with the head or the insert into the inner hole of the spindle. The inserted part of the tool must be matched with the inner hole of the spindle or the corresponding axis of the handwheel to adjust the position of the machine to make the probe slowly advance. In the human drill mold, stop the attention after entering the appropriate depth to avoid the probe being in contact with the equipment in the place where the drill is corroded or worn. Then slowly rotate the spindle one or a few times, and record the swing of the lower needle (for horizontal machine tools, there are four positions of up and down, left and right, for vertical machine tools, there are four positions in front, back, left and right), if coaxiality If the coaxiality is not within the required range, refer to the static accuracy of the machine tool. According to the swing condition, jog the corresponding axis of the machine tool and re-adjust the position of the machine tool until the coaxiality meets the requirements, that is, the position of the workpiece is in accordance with the position. At this point, the coaxiality is corrected. From the above conditions and the machining program, the center coordinate of the hydraulic tappet hole of the coordinate is the center of the hydraulic tappet hole. Connect the button on the operation panel, and then press the soft key to display the screen, the parameter can be rewritten at this time. Calling the parameters will disconnect the machine from the position and position according to the information prompt, then re-open the machine power and return to the reference point. The reference point found at this time may not meet the requirements of the position of the workpiece. Move the machine tool to one or know from the above-mentioned known conditions. When the machine tool is at this position, the data of the coordinate axis in the program is the position or position. Use the above method of finding the coaxiality to find the coaxiality, and record the coordinate data at this time. Use one coordinate data to move the machine back to the coordinate data. If an overtravel alarm occurs during the movement, modify the data of the corresponding axis of the parameter to eliminate the overtravel alarm. (Finish)
Tactile blind indicators are useful for multi purposes. From internal town roads to city highways, from shopping malls to parking plazas etc. MSG offers a wide range of stainless steel road studs indicators. We use CNC machines to produce indicators of custom shape, size and thickness. They could be finished in different color as well.
Huiye Hardware & Electrical Equipment Company Ltd. , https://www.huiyehardware.com
We have professional experts to help produce your custom design road blind indicators. If you don`t have a drawing, you can tell us your idea and our engineers will prepare a CAD/Solidworks drawing for you.
