An old customer of S&A---Mr. Chen consulted us about the cooling with the relevant water chiller model
The technical parameter of CW-6200:http://Products/ChillerCW62005100Wco.html
CONTACT S&A
TE:+86-20-89301885
FAX:+86-20-84309967
SKYPE: teyuchiller
Email:
Website: http://
Forged Sleeve,Forging Steel Sleeve,Sleeve Forging,Cold Forged Sleeve Suzhou SNK Machinery Equipment Co.,LTD , https://www.snkforging.com
Mr. Chen had purchased S&A CW-6200AN water chiller before to cool
their device. Recently he has just purchased a 15W UV laser, requiring a
flow rate of 10-15L/min and a pressure of 0.6-0.8bar. Then he asked if
S&A CW-6200AN water chiller could be used for the cooling. Our
answer was: No.
For the 15W UV laser, we recommended S&A CW-5300 water chiller with
up to 1800W cooling capacity and ±0.3℃ precisely temperature control to
cater for the cooling requirement of the 15W UV laser.
S&A has established a complete and strict quality management system
to realize the strict control on the acquisition of components, the
equipment production, the delivery and the after-sales service. As the
saying goes, sharp tools make good work. Since condenser is the center
of an industrial water chiller, S&A has invested millions of money
in condenser production equipment and made strict control on a series of
processes, including fins, bends and welding etc. to secure the quality
of condenser. Also the introduction of welding robots has significantly
improved and perfected the welding procedure. Therefore it can
efficiently prevent the machinery breakdown caused by solder skips. This
is also the main reason that why S&A water chiller has stable
quality.
