• Model NO.: YB-50/65/80/100
  • Type: Vane Pump
  • Performance: Explosion
  • Place of Origin: Zhejiang China (Mainland)
  • Name: Yb Vane Pump/ Vane Truck Pump /Fuel Dispenser Pump
  • Transport Package: Wooden Cases
  • Origin: Zhejiang, China
  • Acting Form: Single-Acting
  • Displacement: Variable Pump
  • Certification: ISO
  • Model Number: Yb-50/80/100
  • Trademark: JIASONG
  • Specification: SGS
  • HS Code: 8413810090
Main Features

YB series self-priming rotary vane pump is with by-pass valve built-in. The pump uses a rotor with sliding vanes to drive the liquid transfer. The material of construction is nodular cast iron with self-lubricating vanes. Due to its superior performance, the pump can handle viscous and volatile liquid and require less horsepower than other equivalent pumps. The pump has its obvious advantage in the transmission of high flow at low revolution.
Application
Oil tank truck
Fleet refueling.
Lube oil
Aviation refuelers
Transmission of petrochemicals, gasoline, diesel, biofuel, solvent, etc.

Installation

With cardan shaft or hydraulic motor, the pump can be installed on oil tank trucks. And also it can be installed on metal baseplates with motor or diesel engine, using for high flow fuel dispensers and floating fuel equipments which are compose of pumps and flowmeters. Equipped with Teflon seals, the pump can also transfer a wide variety of solvent in the petrochemical industry.
Model Size/Flow Rate/Speed 650 RPM 600RPM 550 RPM 500 RPM 450 RPM 400 RPM
G/min L/min G/min L/min G/min L/min G/min L/min G/min L/min G/min L/min
YB-50 50mm/2'' 80 300 72 270 64 240 56 210 48 180 40 150
YB-65 65mm/2.5'' 132 500 123 465 114 430 103 390 93 350 82 310
YB-80 80mm/3'' 265 1000 243 920 222 840 200 760 180 680 160 600
YB-100 100mm/4''             505 1900     405 1530
 Performance Data
Model YB-50 YB-65 YB-80 YB-100
Rated Speed 640RPM 640RPM 640RPM 640RPM
Power HP 3.0 5.0 10 25
KW 2.2 4 7.5 18.5

Tank Truck Fuel Transfer Vane Pump

Stamping Parts

Stamping parts are metal or plastic components that are produced by stamping or pressing a sheet of material with a die. This process involves the use of a stamping press, which applies pressure to the material to shape it into the desired form. Stamping parts are used in a wide range of industries, including automotive, aerospace, construction, and electronics. Some common examples of stamping parts include brackets, clips, connectors, hinges, and terminals. The advantages of stamping parts include high production efficiency, low cost, and the ability to produce complex shapes and designs.

Stamping Parts,Galvanized Steel Sheet,Thin Sheet Metal,Metal Sheet Stamping Parts

Suzhou Gold ant Precision Sheet Metal Co.,Ltd , https://www.sgpsheetmetal.com