When it comes to the temperature of refrigerated trucks , everyone should not be unfamiliar with them because refrigerated trucks use low-temperature environment to ensure that the quality of goods in transit is not degraded. What is the low-temperature environment that refrigerated trucks create? Is it just low temperature that ordinary people understand? In order to maintain the low temperature in the road before continuous transportation, the device on the refrigerator alone is definitely not enough. The refrigerated truck is also equipped with the refrigeration unit of the refrigeration unit and the polyurethane insulation compartment. The refrigeration unit provides a constant supply of "cold" important equipment for refrigerated trucks. It is generally installed at the top of the front of the container and has the appearance of an air conditioner, but it has stronger cooling capacity than the air conditioner of the same size. Refrigeration units are generally divided into two types: stand-alone units and non-independent units. The difference is that the independent units generate power for maintenance by completely using another unit. The non-independent units are fully powered by the engine's engine work to drive the group. Refrigeration work. As to whether an independent unit or a non-independent unit is used, it is generally selected according to the volume of the refrigerator body and the temperature requirements of the goods being transported. Since refrigerator cars are used exclusively for temperature-sensitive products, the guarantee of temperature is the key to refrigerated vehicles. Improper use or improper operation can result in the goods not being stored or shipped in good condition. Only the correct use and operation of a refrigerated truck can guarantee the complete delivery and preservation of the goods. 1, refrigerated trucks are not cold storage, refrigeration units are mainly insulation. Instead of reducing the temperature of the cargo, when the temperature of the outside world enters the compartment of the refrigerated truck through radiation, conduction, and convection, the cooling air blown by the refrigeration unit will carry it away, blocking the heat source from entering the cargo. 2, the goods need the necessary temperature to transport, otherwise it may be deteriorating. 3, before loading the car must be pre-cooled or preheated. 4. Frequent cleaning and refrigerating carriages keep the inside of the carriage clean and clean. The interior of the compartment must be kept clean; there should be no wrapping paper or paper scraps on the floor; debris can impede the flow of air or be inhaled by the evaporator. 5. Appropriate packaging is essential to protect the goods. For non-ventilated containers for refrigerated goods, side-ventilated containers for fresh produce. The box must be compressive. New Type
Production structure have 3 series: Solid fin(big fin) with slant insert tube , single fin(Small fin) with parallel tube expansion and single fin with slant insert tube
The structure have the Al tube expation and Al tube insert with small fin and big fin
Our company mainly produces products for:Fin Evaporator.Fin Type Condenser.Capillary Tube.Aluminum Coolant Reservoir.Plate Reinforcement Parts.Stamped Parts.Aluminum Tube.Instrument Testing Equipment.
new type Xinxiang Yukun Refrigeration Technology Co.Ltd , https://www.ycevaporator.com
Product Description
Material Composition:
Aluminum Tube OD:: Φ8mm Wall Thickness: 0.508~1.0mm
Aluminum foil thickness: 0.13-0.2mm
Process: Fin stamping and tube bending→tube end press and twist→fins and tube assembly→ leakage test→keeping pressure→packing
Raw material
(1)Al tube:OD 8mm, wall thickness:0.508-1.0mm
(2)Al foil thickness: 0.13-0.2mm
Application
refrigeration parts
Structure
(1)pull and expanded type
(2)slant inserting type
Key process
Fin stamping and tube bending→tube end press and twist→fins and tube assembly→ leakage test→keeping pressure→packing
Specially refrigeration Al tube and Al. foil fin, pure surface, light weight.
High quality inner clearance, high capability of heat-exchange.
High performance corrosion resistant.
Apply to the refrigeration R134a, R600a.
Production surface can be painted with blue or black painting
Solid Fin Evaporator:
Small fin with tube expansion
Small fin with slant insert tube
Fin evaporator moudle with heater
If you have any interest, pls feel free to contact with us at any time. We can supply copper evaporator and copper condensers according to your drawings or samples.
