Hydraulic Busbar Cutting Punching Bending Machine
The multifunction busbar processing maching is the patented product developed by our company.Comparing with the traditional Busbar Processing Machine, this product has the following advantages and features:
The punching and shearing units adopt round integral structure, with novel and unique design rendering reasonable force bearing, and thus effectively guarantees the long-term use without deformation;
The bending unit uses integral structure and CNC angle control mode, allowing easy operation and high accuracy;
This machine adopts the design approach of double-layer work bench, truly realizing the simultaneous working of three stations without mutual interference;
The machine is provided with an automatic oil charge and discharge system, easy to operate, with the hydraulic oil charged into the oil tank via a filter so as to protect the entire hydraulic system from contamination;
This machine is provided with stainless steel oil tank to protect the hydraulic oil from corrosive deterioration, and extend the service life of hydraulic oil and the seals; PLC control that is stable and reliable.
Swappable dies offering extreme convenience;
PLC control that is stable and reliable.
Hydraulic Punching Machine,Hydraulic Busbar Cutting Punching Bending Machine,Cnc Busbar Punch Machine,Cnc Busbar Shear Machine JINAN EURO-ASIA MACHINERY CO., LTD , https://www.euroasiamachine.com
Features:
* Customer friendly operation
* Best exterior construction and good appearance* Trustable highly precise metrology equipment
* High performance for electronic parts
* High quality explosion-proof motor with strong ability against power fluctuation
* Specially designed filtering systems with build-in re-cleanable filter
* With rich functions expansion like POS for smart card and bank card
* Flexible fuel application for gasoline, diesel, and kerosene etc.
* Works well in harsh conditions, like extremely cold, hot, humid, and sand-stormy environment
Optional Configuration:
Printer,IC card, ID card, communication for FMS, vapor recovery, break away,swivle, emergency stop, LED light,ect.
Technical specifications:
Accuracy for the unit
±0.25%
Flow rate
45Â ~80L/min
Ambient temperature
-25ºC~ +55ºC; -40ºC ~ +50ºC
Relative humidity
20% -Â 95%
Unit noise rate
< 70dB (A);
Inlet vacuum rate for   suction pump
>=54kPa
Communication
With RS 485 port, or current loop
Power supply
AC 220V(   -15%~+10%),(50/60±1)Hz ;
AC 380V( -15%~+10%); (50/60±1)Hz
Digit of sale
7digits (decimal points can be adjusted )
Digit of volume
6digits (decimal points can be adjusted )
Digit of unit price
5digits (decimal points can be adjusted )
Totalizer of sale
0~42949672.95Â
Totalizer of volume
0~42949672.95Â
Model
Product
Nozzle
Display
Package(mm)
Gross weight
SK56Z/G/QF424B
2
4
2
1/side
1318*820*2480
367/397
SK56Z/G/QF632B
3
6
4
2/side
1318*820*2480
427/457
SK56Z/G/QF422B
2
4
2
1/side
1318*820*2480
367/397/315
SK56Z/G/QF632B
               3
6
2
1/side
1318*820*2480
427/329
SK56Z/G/QF842B
4
8
2
1/side
1318*820*2480
Â
Z :   Vane pump   G: Gear pump  Q: Submersible pump 
About Us
SANKI Group includes SANKI and WENDBELL, is the leading refueling equipment manufacturer and a Total Retail Solution Supplier in China. SANKI is located in Beijing Economic-Technological Development Area, the SANKI Factory is a state of the art high-tech facility, Delivering high Quality products and Solutions with Commitment, customization Flexibility and Total Cost Ownership.
SANKI specializes in the design and manufacture of total refueling solutions for the oil and gas industry, with wide product range that covers motor spirit and diesel dispensers, LNG/LPG dispenser, SF Tanks, Skid stations, Automatic tank gauging equipment, Fuel management system & tank calibration system.
All key components manufacture, such as flow meters, pumps, and the entire electronic head are designed and manufactured in house by SANKI in China. Sanki is also the only dispenser manufacturer to have an in-house electronics board manufacturing line within their local facility.
With a manufacturing capacity over 6000 unit per month, The SANKI sales and network covers over 40 countries around the word, including Eastern Europe, Russia, Australia, Asia, Africa & South America. Within China, Sanki is also one of 3 main suppliers to China's SINOPEC and PECHOCHINA Oil companies with more then 70 Sales and Support/Service centers and 67 authorized partners across China
.
Â
Trademark: SANKI
Specification: 2087*740*2550mm
Origin: Beijing Sanki
HS Code: 8413110000