At the recent Shandong Provincial Science and Technology Awards Conference, Qingdao Tiandun Rubber Co., Ltd. and Shandong Jinyu Tire Co., Ltd. jointly developed the “High-Valued Remanufacturing Remanufacturing Complete Set of Technical Equipment and Applied Technology for Used and Special-purpose Tire†by Shandong Provincial Science and Technology Progress. Awards. This marked a major breakthrough in China's remanufacturing complete sets of technical equipment with independent intellectual property rights, and its application in the recycling of general used tires. However, the news came but the industry was not happy. “Because of the lack of substantial support from the relevant national policies, it is difficult to promote the use of advanced technology for the renovation and recycling of used tires. Now the development of this industry has faced an unsustainable situation.†Zhang Hongmin, chairman of Shandong Rubber Industry Association, told the reporter. According to Zhang Hongmin, in 2010, China produced about 250 million scrap tires, but the refurbishment rate was only about 3%, not only far lower than the world’s largest tire refurbishment country—about 14% renovation rate in the United States, but also less than 6%. The world average of %. This is not commensurate with China’s tire production and automobile production and sales in the world's largest country. “The reason why this huge contrast occurs is not unrelated to the lack of relevant national laws and regulations. China has not established a complete incentive mechanism to encourage the recycling, processing, and reuse of used tires. We introduced fiscal and taxation [2011] No. 115 at the end of last year. Text, canceled the VAT concession for re-tipping, tire refurbishment companies worse." Zhang Hongmin said. And Zhang Hongmin holds the same view as Director Wang of Shandong Jinyu Tyre Co., Ltd. Director Wang told the reporter that in 2007, the National Development and Reform Commission issued the “Eleventh Five-Year Plan†Guidelines for Comprehensive Utilization of Resources, and listed the industrialization of waste tires and other renewable resources as one of the six key projects for comprehensive utilization of resources. The "Regulations on the Management of Used Tire Recycling and Utilization" has been listed in the 2007 regulations, and plans to provide strong support in taxation, funds and other aspects. However, five years have passed and most of the above “planning†and “opinions†still remain on paper, lacking substantive and operational specific policy support, and the “Regulations on the Management of Used Tire Recycling and Utilization†that companies are looking forward to are still in place. Solicitation stage. Due to lack of policies and inadequate supervision, the entire industry is difficult to regulate. The person in charge of Shandong Qingyun Huatai Rubber Products Co., Ltd. believes that although used tire retreading companies already have production capacity, due to poor access, old tires that can be refurbished are difficult to recycle. Among them, there are not only legitimate reclaimed rubber and rubber powder manufacturing enterprises competing for the old tire source, but also the production and sales of non-“three packs†tires, standard tires, etc., which makes it difficult for used tire retreaders to establish stable old tires. The supply chain has hindered the healthy development of the industry. “The phenomenon of small, chaotic and poor tire retreading enterprises is relatively common and it is difficult to form a scale advantage.†Wang Bo, deputy director of the Shandong Triangle Group Technology Development Center, told reporters that at present, more than 80% of the enterprises engaged in tire renewal are SMEs. The annual output of these companies' retreaded tires is generally between 10,000 and 20,000, and few of them have reached 100,000 or more. In Shandong Province, Delta (Weihai) Huada Tire Rehabilitation Co., Ltd. is the largest tire retreading company with an annual production capacity of less than 500,000, and a company in the United States has an annual turnover of 20 million tires, accounting for the world 25% of total tires. Rongcheng Tire Renovation Plant, Yin, believes that the development of China's tire retreading industry is lagging behind. Besides the company’s own reasons, it is also related to the lack of policy support. "In terms of policy, many countries and regions have implemented waste tires free of charge. Enterprises recycling used rubber products not only do not spend money, but also receive subsidies. All products produced are also exempt from tax," said Yin. Professor Ji Kuijiang, a senior expert in the field of used rubber product research and application, and a professor at Qingdao University of Science and Technology, said that in the United States, California can receive a subsidy of US$0.5 per one used tire, and in China’s Taiwan region, every one ton of used tires can be processed. With a subsidy of NT$3,200, Taiwan’s enterprises in Hong Kong will also receive subsidies of HK$868 per tonne for recycling of used tires. In mainland China, most enterprises need to pay VAT in full, and the tax burden is 2 to 3 times higher than that of other manufacturing industries such as machinery and chemical industry because the purchase of used rubber products is not worth the VAT offset invoices. This unfairness in policy is the biggest obstacle to the development of China's waste rubber recycling industry. Isostatic Graphite are widely used in medical treatment, metallurgy, chemical, airspace, and other industries, etc. Isostatic Graphite Boat,Isostatic Graphite Sheet,Isostatic Graphite Board,Isostatic Graphite Tablets Henan Carbon Road New Material Technology Co., Ltd , https://www.kyisostaticgraphites.com
We have Various kinds of graphite rods are available, such as :
1 Isostatic Graphite Rod
2 Molded Graphite Rod
3 Extruded Graphite Rod
4 Vibrating Graphite Rod
We can provide different specification quality Isostatic graphite rods.
1) Non-standard sizes can be designed and manufactured as per drawings or sample.
2) High temperature and oxidation resistance, corrosion resistance, longevity.
3) It is widely used in hot mineral and metallurgical and chemical industries.