PP Steel Wire Extension Pipe Extrusion Making Machine

PP Steel Wire Extension Pipe Extrusion Making Machine 


Extension Pipe Introduction: 
PP (polypropylene (PP plastic) is another good resin after nylon. it is a high-density, non-linear polymer side chain, high crystallization will, with excellent overall performance. When not colored white translucent, waxy;. lighter than polyethylene polyethylene transparency are more good than polyethylene rigid).
Features: Full environmental protection materials PP, inside and outside the spiral is uniform, smooth and shiny appearance, good flexibility, abrasion resistance, low cold resistant characteristics


Extension Pipe Application: 
1. indoor air intake, exhaust air conditioner;
2. The textile machine ventilation tube;
3. Civil machines, metal processing machines grinding set, vacuum tubes, all kinds of industrial vacuum cleaner tube;
4. Marine inflatable tube pump, pump tube;
5. Mine, mine pit aspirated, exhaust, drain;
6. All kinds of construction site with water, drainage, exhaust, dust emission;
7. A variety of mechanical ventilation exhaust pipe;
8. The wire and cable sheathing;
9. agricultural irrigation drainage;
Specifications: do 40-200MM, length of 1-10 meters, and a variety of colors according to customer requirements.



Equipment List: 
1. Single Screw Extruder
2. Extrusion Mould
3. Shaping Mould 
4. Shaping Machine 
5. Haul-off Machine
6. Cutting Machine
7. Rotation Stacker. 
Note: This line also can produce PP helix Hose. 

Machine Details: 

1. Payment Term: 30% for prepayment by T/T, 70% for balanced payment by T/T, or L/C can be acceptable
2. Delivery Time: 40 days after receipt of prepayment.
3. Packing Method:  Packing film or wooden case
4. Guaranteed Time:  12 months

1. When machine finished, we will invited client come to our factory to check the machine and do the machine test. If machine is ok, then client pay for the balance. And inspect machine load the container.
2. When machine arrives client's factory, if client needs, we will send 1-2 engineer to client's factory do the machine installation and running test, and also train the local worker how to operate and maintain the machine. It is chargeable.
3. If have any question or problem on machine operation or maintain, welcome to contact to us by email or calling. We stand by 24 hours. 

PP Steel Wire Extension Pipe Extrusion Making Machine 


Extension Pipe Introduction: 
PP (polypropylene (PP plastic) is another good resin after nylon. it is a high-density, non-linear polymer side chain, high crystallization will, with excellent overall performance. When not colored white translucent, waxy;. lighter than polyethylene polyethylene transparency are more good than polyethylene rigid).
Features: Full environmental protection materials PP, inside and outside the spiral is uniform, smooth and shiny appearance, good flexibility, abrasion resistance, low cold resistant characteristics


Extension Pipe Application: 
1. indoor air intake, exhaust air conditioner;
2. The textile machine ventilation tube;
3. Civil machines, metal processing machines grinding set, vacuum tubes, all kinds of industrial vacuum cleaner tube;
4. Marine inflatable tube pump, pump tube;
5. Mine, mine pit aspirated, exhaust, drain;
6. All kinds of construction site with water, drainage, exhaust, dust emission;
7. A variety of mechanical ventilation exhaust pipe;
8. The wire and cable sheathing;
9. agricultural irrigation drainage;
Specifications: do 40-200MM, length of 1-10 meters, and a variety of colors according to customer requirements.



Equipment List: 
1. Single Screw Extruder
2. Extrusion Mould
3. Shaping Mould 
4. Shaping Machine 
5. Haul-off Machine
6. Cutting Machine
7. Rotation Stacker. 
Note: This line also can produce PP helix Hose. 

Machine Details: 

1. Payment Term: 30% for prepayment by T/T, 70% for balanced payment by T/T, or L/C can be acceptable
2. Delivery Time: 40 days after receipt of prepayment.
3. Packing Method:  Packing film or wooden case
4. Guaranteed Time:  12 months

1. When machine finished, we will invited client come to our factory to check the machine and do the machine test. If machine is ok, then client pay for the balance. And inspect machine load the container.
2. When machine arrives client's factory, if client needs, we will send 1-2 engineer to client's factory do the machine installation and running test, and also train the local worker how to operate and maintain the machine. It is chargeable.
3. If have any question or problem on machine operation or maintain, welcome to contact to us by email or calling. We stand by 24 hours. 

FRP XPS Foam Panel

Frp Xps Foam Sandwich Panel,Foam Sandwich Panel,Aluminum Foam Panels,Aluminum Foam Core Panels

YANGZHOU MAXTONE COMPOSITE CO.,LTD. , https://www.maxtonetruckbody.com