Post Tensioning PT Anchor Head and Wedge

Post Tensioning PT Anchor Head And Wedge

Definition of Parts:

Anchor head is the key part of bearing the prestressing tension, The round anchor head is made by 45# high-quality carbon construction steel, and the flat anchorage is made by 40Cr steel. Anchor head include round anchor head and flat anchor head

Wedge is the key part of anchor system, which is made by high-class alloy steel 20CrMnTi. Its form is divided into two-chip and three-chip. The system apply to the two-chip YJM15 series, it can be used for round anchorage, flat anchorage, but also used for porous coupler



Production Process:
1.Raw Materials---2.1.Raw Materials---3.Holes Cone Shaped Drilling---4.Holes Fine Turning---5.Peeling---6.Chamfering---7.Deburring & Chamfering---8.Quality Checking---9.Static Loading Test---10.paperbox---11.woodcase---12.ready for shipping

Application
----Prestressed Concrete Post Tensioning PC Steel Wire PT Anchor Wedges
----Prestressed Anchor system is a completed, independent building measure researched, it has been widely adopted by modern construction, especially used in pre-tension or post-tension for concrete constructions as building materials, such as bridge construction, railway and highway construction, buildings and channel construction, etc. 
----It has been widely adopted by modern construction, especially used in pre-tension or post-tension for concrete constructions as building materials.

YJM System is consist of stress-end anchor, fixed-end anchor,anchor coupler and corrugated pipe. It can be divided into 
YJM13,YJM15,YJM18 series of round anchors and BM13,BM15 series of flat anchors, we also have high-strength 
steel wire YJM5,YJM7 series anchor.

Technical data

Prestressed Concrete Post Tensioning PC Steel Wire PT Anchor Wedges
1. YM15 applies to 15.2/15.24mm, 15.7mm pc strand.
2. YM13 applies to 12.7mm, 12.5mm & 12.9mm pc strand.
3. YM18 applies to 17.8mm pc strand.
4. YM22 applies to 21.6/21.8mm pc strand.
5. YM11 applies to 10.8mm pc strand.
6. YM10 applies to 9.3mm, 9.53mm pc strand.
7. YM7, YM6, YM5 apply to 7.0mm, 6.0mm, 5.0mm spiral ribbed pc wire


 

Post Tensioning PT Anchor Head And Wedge

Definition of Parts:

Anchor head is the key part of bearing the prestressing tension, The round anchor head is made by 45# high-quality carbon construction steel, and the flat anchorage is made by 40Cr steel. Anchor head include round anchor head and flat anchor head

Wedge is the key part of anchor system, which is made by high-class alloy steel 20CrMnTi. Its form is divided into two-chip and three-chip. The system apply to the two-chip YJM15 series, it can be used for round anchorage, flat anchorage, but also used for porous coupler



Production Process:
1.Raw Materials---2.1.Raw Materials---3.Holes Cone Shaped Drilling---4.Holes Fine Turning---5.Peeling---6.Chamfering---7.Deburring & Chamfering---8.Quality Checking---9.Static Loading Test---10.paperbox---11.woodcase---12.ready for shipping

Application
----Prestressed Concrete Post Tensioning PC Steel Wire PT Anchor Wedges
----Prestressed Anchor system is a completed, independent building measure researched, it has been widely adopted by modern construction, especially used in pre-tension or post-tension for concrete constructions as building materials, such as bridge construction, railway and highway construction, buildings and channel construction, etc. 
----It has been widely adopted by modern construction, especially used in pre-tension or post-tension for concrete constructions as building materials.

YJM System is consist of stress-end anchor, fixed-end anchor,anchor coupler and corrugated pipe. It can be divided into 
YJM13,YJM15,YJM18 series of round anchors and BM13,BM15 series of flat anchors, we also have high-strength 
steel wire YJM5,YJM7 series anchor.