The working environment and operating environment of the portable CNC cutting boot are relatively poor, and the metal dust is relatively large. Therefore, it is necessary to carry out all the cleaning and maintenance of the machine. It should be done by a person as the lubrication, maintenance and maintenance of the equipment! The following are four key points of the company's maintenance on the portable CNC cutting boot:
I. The key to the safe operation of portable CNC cutting boot:
1. The portable CNC cutting and cutting machine is a kind of precision equipment, so it is necessary to do three operations (cutting machine, fixed machine, fixed station)
2. The operator must have professional training and skilled operation, non-professionals do not move.
3. Before operation, it is necessary to confess that there is no external annoyance. When all are normal, the cut plate shall be hung on the cutting platform. The plate shall not exceed the cutting plan (Note: Be careful when lifting).
II. Maintenance and maintenance of portable CNC cutting boot from time to time:
1. It is necessary to clean up the dirt on the machine tool and guide rails every working day to keep the bed clean and to shut down the gas source and power supply during work hours and empty the air in the machine tool belt.
2. If you leave the machine longer, turn off the power to prevent non-professional operation.
3. Pay attention to inquire whether the machine has horizontal, vertical guide rails and rack surfaces with lubricating oil.
Three. Portable CNC cutting boot weekly maintenance and maintenance:
1. Every week, the machine should be fully cleaned, horizontal and vertical guide rails, gear rack racks cleaned, and filled with lubricating oil.
2. Check if the horizontal and vertical wiper can operate normally. If not, exchange it in time.
3. Check if all the torches can be loosened, and clean up the waste of the burning muzzle so that the combustion will remain normal.
4. If there is auto-tuning equipment, check whether it can be active and whether it can exchange probes.
four. Portable CNC cut boot month and quarter maintenance maintenance:
1. Check whether there is any waste in the total air inlet and whether the valves and pressure gauges can work normally. Check whether various gas pressures are within the allowable plan. Relief valve maintenance, scheduling pressure reducer, the pressure gauge to the required pressure, the scheduling process should make the pressure from small to large, to ensure that the pressure reducer can be continuous scheduling. If it is not possible to schedule continuously or gas leaks from the safety valve, it is necessary to exchange new pressure reducers. The disassembly of the components of the gas pressure reducer on its own will result in equipment damage and even serious personal injury.
2. Check that all the air fittings are loose and all tubes are not damaged. Tighten or exchange if necessary.
3. Before cutting, it is necessary to check whether the type of nozzle used is consistent with the gas used and the thickness of the steel plate to be cut. It is not allowed to use cutting nozzles beyond the planning.