Mini Corn Maize Harvester

mini Corn Maize Harvester

Introduction
This machine completes a row of corn picking and straw crushing. Supporting a set of spike can be removed under the filling bag, stubble height adjustable, tension clutch work safety, small turning radius of small operation. The aircraft per hour of corn corn smelting a month of direct smashing, peeling skin is not clean, ear height of 60 cm above can be harvested, the higher the straw the greater the rate of light bar.

Characters
1: small size, adaptability, widely used in hills and mountains and other large corn harvesters can not pass the sporadic block
2: full-featured, picking crushed straw crushed into the field, etc., and almost the same function
and large corn harvester.
3: matching power, machine delivery.
4: easy to install and disassemble, really a car more use.
5: flexible operation, cutting crop height can be adjusted, turning radius is small.

Specification

Model	ACG-177	ACG-182
Power type	9hp gasoline engine two stroke 177 model	13hp gasoline engine two stroke 182 model
Width of cut	70cm	70cm
Total loss rate	1%	1%
Fuel tank capacity	9L	9L
Work efficiency	0.1ha./h	0.1ha./h
Start mode	Electric start	Electric start
Machine weight	120 kg	120KG
Row number	1	1
Dimension	1350*950*1200mm	1350*950*1200mm

WUHAN ACME AGRO-TECH CO., LTD. is located in WUHAN city, which is the biggest beautiful lake city in middle China, near Yangtze River with developed science and technology and convenient transportation.ACME is a global integrated agricultural machinery supplier and was named as the Fortune Global 500 suppliers by Alibaba in 2012'.

 

it's the membership of

UNGM,UNDP-SS-GATE, CCPIT,CAJCCI(China Africa Joint Chamber of Commerce and Industry),

HBICC(HUBEI International Chamber of Commerce),

HEBA(HUBEI E-BUSINESS Association),

WFIA(Wuhan food Industry Association).

 

focus on

agricultural machinery, food machinery, bio-energy, agricultural engineering and food engineering etc.

 

mini Corn Maize Harvester

Introduction
This machine completes a row of corn picking and straw crushing. Supporting a set of spike can be removed under the filling bag, stubble height adjustable, tension clutch work safety, small turning radius of small operation. The aircraft per hour of corn corn smelting a month of direct smashing, peeling skin is not clean, ear height of 60 cm above can be harvested, the higher the straw the greater the rate of light bar.

Characters
1: small size, adaptability, widely used in hills and mountains and other large corn harvesters can not pass the sporadic block
2: full-featured, picking crushed straw crushed into the field, etc., and almost the same function
and large corn harvester.
3: matching power, machine delivery.
4: easy to install and disassemble, really a car more use.
5: flexible operation, cutting crop height can be adjusted, turning radius is small.

Specification

Model	ACG-177	ACG-182
Power type	9hp gasoline engine two stroke 177 model	13hp gasoline engine two stroke 182 model
Width of cut	70cm	70cm
Total loss rate	1%	1%
Fuel tank capacity	9L	9L
Work efficiency	0.1ha./h	0.1ha./h
Start mode	Electric start	Electric start
Machine weight	120 kg	120KG
Row number	1	1
Dimension	1350*950*1200mm	1350*950*1200mm

WUHAN ACME AGRO-TECH CO., LTD. is located in WUHAN city, which is the biggest beautiful lake city in middle China, near Yangtze River with developed science and technology and convenient transportation.ACME is a global integrated agricultural machinery supplier and was named as the Fortune Global 500 suppliers by Alibaba in 2012'.

 

it's the membership of

UNGM,UNDP-SS-GATE, CCPIT,CAJCCI(China Africa Joint Chamber of Commerce and Industry),

HBICC(HUBEI International Chamber of Commerce),

HEBA(HUBEI E-BUSINESS Association),

WFIA(Wuhan food Industry Association).

 

focus on

agricultural machinery, food machinery, bio-energy, agricultural engineering and food engineering etc.

 

Outport Stopper For I.V Fluid Bag

The outport stopper for I.V fluid bag is based on the polycarbonate joint formed by injection molding process, comprising of the injection‐purpose halogenated butyl rubber stopper and aluminum‐plastic composite cap. Among which, the material for polycarbonate joint is the imported medical‐level polycarbonate, complying with the FDA rules; the aluminum‐plastic composite cap is produced by using the imported top‐quality aluminum strip; the injection‐purpose halogenated butyl rubber stopper can be chosen to use the well‐known domestic product or imported product on the request of user.

The infusion stopper is produced in the clean plant, with the partial part reaching to Class 100 under the Class 10,000 background. The main working procedures, such as the injection molding and the cleaning, riveting, inspection, wash, assembly and etc., are designed and processed as per the cleanliness requirements at the partial level of Class 100, which passes the GMP on‐site certification and complies with the cleanliness requirements of high capacity injection medicine.

The main production equipments, test and inspection instruments of infusion stopper have already reached to the international level and are advanced at home. Meanwhile, the full production process is conducted the strict control and management, and making product free of plasticizing agent, loading agent and lubricating agent, and free of absorption or transfer when contacting with liquid medicine, neither the pyrogen and soluble matter, thence such equipment may ensure the product quality.

The outport stopper for I.V fluid bag is mainly used for double‐hose non‐PVC software bag.

Stopper For I.V Bag,Stopper For Plastic Infusion Bag,I.V Fluid Bag Stopper,I.V Fluid Bag Outport Stopper

YANGZHONG HONGYUN BOTTLE CAPS MAKING FACTORY , https://www.hongyunyz.com