Model NO.: DP-160
Automatic Grade: Automatic
Condition: New
Cutting Method: Can Angle Cutting.Straight Cutting / Tilt Cutting
Cutting Size: 1-160mm Width
Length: Can Et Different Length When Cutting
Cutting Length: Not Limited
Precise: 0.1mm
Drive: Motor
Trademark: DP
Specification: SGS
Origin: Kunshan
HS Code: 844110000
Microcomputer Belt Cutting Machine (DP-160)
  Elastic Bandage,Band,Belt,Webbing,Tape Microcomputer Belt Cutting Machine

Main Technical Parameter:


Model
DP -160
Voltage 220V
Power 1/2HP
N.W. 83kg
G.W. 133kg
Cutting Length 0.1~9999.9mm
Cutting Width 1~160mm
Measurement 550x550x1000mm

Application:
Sizing cutting for heat shrinking tube, flat cable, PVC sleeve, insulation paper, two-sided tape, Velcro, cotton yarn belt, zipper, etc...

Features:
This cutting machine employs microcomputer controller to set belt cutting length. This machine is ergonomically designed. Operation is easy.

Main functions of belt cutting machine:

Feed material and return material by pressing the button on touch screen
Preset total cutting quantity
Preset cutting length
Preset cutting speed
Preset cut quantity each time ( applied for hot cutting)
Flash cutting quantity finished
Return to ZERO

After-service:
1. Warranty for machines is 12 months
2. A promptly reply within 24 hours
3. Free usage training before delivering machines in factory  
Knife installation
 
1,Clear the knife set and the relative interface by clean cotton cloth or gauze cloth
2,Assemble down cold knife on machine, make sure the blade of down cold knife
   and connection board parallel , then tighten 3 fix screws of down cold knife
3,In order to install up cold knife,Please adjust the knife position to top position by manual, then install up cold knife , Don't tighten the fix screws of up cold knife

  4,Please adjust planker to the lowest position by manual method, then tighten the fix
     screws of up cold knife, firstly tighten middle screw, then tighten two sides screws         
5,By manual adjustment knife, make sure the blades of up cold knife and down cold knife expand slowly, repeat the action several times.(In order to avoid and grand the burr of blade), then adjust the planker to the top position
 
Microcomputer Belt Cutting Machine for Elastic Bandage, Band, Belt, Webbing (DP-160)
Microcomputer Belt Cutting Machine for Elastic Bandage, Band, Belt, Webbing (DP-160)
Microcomputer Belt Cutting Machine for Elastic Bandage, Band, Belt, Webbing (DP-160)
 

Easy Open Caps

Easy Open Can,Easy Open Cover,Metal Cap,Easy Tin Cover

Guangzhou Futen Plastic & Metal Products Co.,Ltd , https://www.futencan.com