The most important point of using the instrument is the installation of instrumentation. Only the correct installation can be performed, and there can be no external factors around the instrument that can interfere with the normal operation of the instrument to ensure the normal operation of the instrument. So for the metal tube float flow meter , what should be paid attention to during the installation process, and the SK meter will discuss with you.
Resistance Strip Band Sets,Pull Up Bands,Resistance Band Set,Exercise Resistance Bands,resistance band custom Nantong Yuan International Trade Co.,Ltd , https://www.yuantianwey.com
In order to allow the metal tube floater flow meter to reach a certain measurement accuracy during use, the following points must be noted during the installation process:
1. The metal tube float flowmeter should be installed in the process pipeline, and beside it must be installed some bypass pipelines and bypass valves. This is also to better replace the flowmeter and clean the pipeline when testing and repairing. Daily inspection of metal tube float flow meter is more convenient.
2. Install the magnetic filter and valve, which can make the magnetic material in the medium filter out smoothly when using the flowmeter to measure, if the medium contains solid impurities, it can also pass through the filter. Filtered out.
3. Install the valve at the outlet of the instrument. This is also done so as to be able to directly discharge gas from the outlet of the flowmeter when measuring the gas flow. If it is discharged directly at the outlet, it is easy to cause a decrease in air pressure, resulting in data loss. effect.
4. Try to avoid installing the instrument in a place where it is exposed to direct sunlight. This will cause damage to the liquid crystal display instrument and will greatly reduce the service life of the liquid crystal.
In short, the installation of the instrument must be based on the principle and structure of each instrument, select the appropriate environment and installation techniques, and install it from the instrument itself. Do not think how to install the instrument if it is comfortable. It may adversely affect the instrument. And thus get a bad result.