PVC Edge Banding For Furniture
The main function of the edge banding is to seal the cross-section of the board, so as to avoid the damage of the board and the adverse factors (mainly moisture) in the process of use and prevent the formaldehyde inside the board from volatilizing, and at the same time achieve the effect of beautiful decoration.
The product has the following main features: smooth surface, no blistering, no ribbing, moderate gloss, smooth surface and back surface, uniform thickness, uniform width, reasonable hardness, high elasticity, good quality, strong wear resistance, trimmed and sealed The color of the side and the side is close to the surface color, not whitish, good gloss, and the overall color of the finished furniture is coordinated.
Furniture edge banding is a material for protecting, decorating and beautifying the section of furniture panels. It can make a piece of furniture show the overall effect of clear wood grain and colorful.
PVC furniture edge banding is relatively light, which is relative to metal and plexiglass. The reason for the lightness is not because it is a polymer compound, but because they are organic compounds, which are composed of carbon, hydrogen, oxygen, and chlorine. And other lighter elements. PVC Edge Banding For Furniture,Pvc Edge Banding For Furniture, Edge Banding For Furniture,Pvc Edge Banding Tape Henan Shunbang Chemical Industry CO.,Ltd , https://www.suspensionpvc.com
The Japan Automobile Dealers Association said that the monthly sales of domestic autos have dropped for the eighth consecutive month, and fell to the lowest sales level since May 1968. The impact of the earthquake in Japan in March on automobile production, and therefore the auto Sales dropped dramatically.
According to the data, in May 2011, the sales volume of Japan’s top car maker Toyota Motor Corp. in Japan was 48,700 vehicles, down 57% year-on-year; sales of Nissan Automobile were 28,000 vehicles, down 16% year-on-year; sales of Honda Motors declined year-on-year. 35% to 21,300.
"The impact of the major earthquake on Japanese car sales is obvious," said Michiro Saito, general manager of the Japan Automobile Dealers Association. "Perhaps when auto production starts to recover gradually in June, car sales will rebound."
The material of pvc furniture edge banding is plastic, which is easy to process. Plastic has plasticity, that is, it deforms after heating or pressurizing, and maintains its original shape after the temperature drops or the pressure disappears. It can be processed into edge bands of their respective shapes by extrusion and other methods, such as T-shaped edge bands, H-shaped edge bands, D-shaped edge bands, V-shaped edge bands, I-shapes, and so on.
pvc furniture edge banding is of high quality and low price, and the price of plastic is far less than that of metal.
According to data released by the Japan Automobile Dealers Association, the number of cars sold in Japan in May 2011 fell by 38% year-on-year to 142,200 units. This figure does not include sales of mini vehicles.