Model NO.: SI series (ISO 6431 Standard)
Double-Acting Cylinder Type: Common Cylinder
Bore Size: 32, 40, 50, 63, 80, 100, 125, 160, 200mm
Model: Si, Sid, Sij
Trademark: XCPC
Transport Package: Wooden Case, Pallet, Seal Paper, Carton
Specification: ISO9001: 2008; CE
Origin: China
Model NO.: SI series (ISO 6431 Standard)
Double-Acting Cylinder Type: Common Cylinder
Bore Size: 32, 40, 50, 63, 80, 100, 125, 160, 200mm
Model: Si, Sid, Sij
Trademark: XCPC
Transport Package: Wooden Case, Pallet, Seal Paper, Carton
Specification: ISO9001: 2008; CE
Origin: China
Pneumatic Cylinder---SI series ISO6431 Standard Cylinder

1. Features:

1). Standard design, simple structure, low starting pressure, smooth motion.

2). Adjustable cushion on both cylinder end covers to make sure the cylinder works very smoothly, safety and with low noise.

3). Wide range for sizes

4). With self-lubricating bearing, the piston rod is lubrication free.
ISO6431 Standard Air Cylinder (SI series)

2. Specifications:

1). Model: SI ISO6431 standard double action type
SID ISO6431 standard two axis double action type
SIJ ISO6431 standard two axis adjustable stroke type

2). Bore size: 32, 40, 50, 63, 80, 100, 125, 160, 200mm

3). Fixed type: LB type; FA type; FB type; CA type; CB type; TC type; TC-M type

4). Motion pattern: Double action

5). Working medium: Air

6). Pressure range: 0.1MPa to 0.9MPa

7). Ensured pressure range: 1.35MPa

8). Temperature range: -5º C to 70º C

9). Operating speed range: 50 to 800mm/s

10). Buffer type: Adjustable buffer

11). Port Size: 32mm: G1/8"; 40/50mm: G1/4"; 63/80mm: G3/8"; 100/125: G1/2"; 160/200: G3/4"

3. Internal Structure:

1). Piston rod nut
2). Piston rod
3). Front cover seal ring
4). O-ring
5). Bearing
6). Front Cover
7). Buffering o-ring
8). Piston rod o-ring
9). Barrel
10). Piston
11). Wearing
12). Magnet(Optional)
13). Piston O-ring
14). Pipe wall o-ring
15). Damping
16). Haax socket screw
17). Back cover
ISO6431 Standard Air Cylinder (SI series)


Other ISO Standard Pneumatic Cylinders are also available for you:

DNG ISO15552 Standard cylinder

DNC ISO6431&VDMA24562 Standard cylinder

MA ISO6432 Mini cylinder

ADVU ISO6431 Compact/Thin cylinder

Our company also can provide other pneumatic cylinders as below,

1. Standard cylinder: SC/SU, MB, CA1

2. Compact cylinder: SDA, CQ2

3. Mini cylinder: MA, MAL, CJ2, CM2, CJP

4. Double-shaft cylinder: TN, CXS

5. Free installation cylinder: CU

6. Slide bearing cylinder: STM

7. Three-shaft cylinder: MGP

8. Stopper cylinder: RSQ

9. Clamp cylinder: XCK

10. Rotary cylinder: MSQ

11. Rodless cylinder: CY1

12. Air gripper: XHZ2/XHC2, XHL2, XHT2

More information and details, you can contact us and visit our website.

If you have the nonstandard products want to design, don't hesitate to contact us.

XCPC is your good choice in Pneumatic! Pneumatic Cylinder---SI series ISO6431 Standard Cylinder

1. Features:

1). Standard design, simple structure, low starting pressure, smooth motion.

2). Adjustable cushion on both cylinder end covers to make sure the cylinder works very smoothly, safety and with low noise.

3). Wide range for sizes

4). With self-lubricating bearing, the piston rod is lubrication free.
ISO6431 Standard Air Cylinder (SI series)

2. Specifications:

1). Model: SI ISO6431 standard double action type
SID ISO6431 standard two axis double action type
SIJ ISO6431 standard two axis adjustable stroke type

2). Bore size: 32, 40, 50, 63, 80, 100, 125, 160, 200mm

3). Fixed type: LB type; FA type; FB type; CA type; CB type; TC type; TC-M type

4). Motion pattern: Double action

5). Working medium: Air

6). Pressure range: 0.1MPa to 0.9MPa

7). Ensured pressure range: 1.35MPa

8). Temperature range: -5º C to 70º C

9). Operating speed range: 50 to 800mm/s

10). Buffer type: Adjustable buffer

11). Port Size: 32mm: G1/8"; 40/50mm: G1/4"; 63/80mm: G3/8"; 100/125: G1/2"; 160/200: G3/4"

3. Internal Structure:

1). Piston rod nut
2). Piston rod
3). Front cover seal ring
4). O-ring
5). Bearing
6). Front Cover
7). Buffering o-ring
8). Piston rod o-ring
9). Barrel
10). Piston
11). Wearing
12). Magnet(Optional)
13). Piston O-ring
14). Pipe wall o-ring
15). Damping
16). Haax socket screw
17). Back cover
ISO6431 Standard Air Cylinder (SI series)


Other ISO Standard Pneumatic Cylinders are also available for you:

DNG ISO15552 Standard cylinder

DNC ISO6431&VDMA24562 Standard cylinder

MA ISO6432 Mini cylinder

ADVU ISO6431 Compact/Thin cylinder

Our company also can provide other pneumatic cylinders as below,

1. Standard cylinder: SC/SU, MB, CA1

2. Compact cylinder: SDA, CQ2

3. Mini cylinder: MA, MAL, CJ2, CM2, CJP

4. Double-shaft cylinder: TN, CXS

5. Free installation cylinder: CU

6. Slide bearing cylinder: STM

7. Three-shaft cylinder: MGP

8. Stopper cylinder: RSQ

9. Clamp cylinder: XCK

10. Rotary cylinder: MSQ

11. Rodless cylinder: CY1

12. Air gripper: XHZ2/XHC2, XHL2, XHT2

More information and details, you can contact us and visit our website.

If you have the nonstandard products want to design, don't hesitate to contact us.

XCPC is your good choice in Pneumatic!

Oil Kettle

Oil Kettle


Food grade SS304 oil kettle with leak proof design to prevent spillage. Some items with slender spout ,which can easily to pour ,and stream control. Different size for you to choose, and is suitable for storage of various liquids and use in kitchen or dinner table.

Silver and color painting items is available, welcome to talk with us for any question and inquiry.

Welcome to contact us for more details about it and our factory, if you want to visit our factory,please feel free to talk with us. Will be glad to hear from you.





Material:SS304

Finishing: Satin polishing ,Mirror Polishing ,Color painting

Logo: Laser logo, Etching logo, Silk printing logo, Embossed logo, Decal logo

MOQ : 2000 PCS

Packaging : White box, Mail box or Customized package

Sample Time : 7~10 days

Lead Time :60 days after have the deposit

Payment: T/T ,L/C or others

Payment term: 30% deposit before production and 70 % balance against the copy B/L


stainless steel oil kettledifferent size oil kettle oil can





FAQ:


1:How can I get the sample?

We can provide the sample for customers to check the quality.

Please kindly provide the delivery info for calculate the sample cost. If you have DHL /TNT/UPS/FEDEX account, please also kindly provide it to us.

You can do the payment of sample via T/T and PayPal.

2:How about the sample time?

Usually the sample time is 7~10 days after have the sample cost.


3:How long will it take for mass production?

Usually 45~60 days after have the deposit.


4:Can we have our logo or company name to be printed on your products or the package?

Welcome OEM.


5:what certificate can you provide?

CE,CB,GS,FDA,LFGB,ROHS are available here.


6:How can we get your monthly new products announcement?

Please join our mailing lists.




Our Service


Excellent quality

OEM packaging and product

Good service

Rich experience save your time and money


Oil Kettle,Olive Oil Kettle,Coconut Oil Kettle,Good Health Avocado Oil Kettle

Jiangmen Wellway Houseware Co.,Ltd , https://www.jmwellwayhouseware.com