STORAGE FROM 10 TO 200m³
Feiyya cement and lime silos are the equipped version of the traditional monolithic and telescopic silos. They have a diameter of 2.2. 2.4.2.6.3.0.3.2 and 3.6 m, can have a storage capacity from 10 to 200 m³ and are suitable for storing and dosing cement, lime, ash, sand and similar materials. Sized to optimize transport costs, pre-cabled and pre-assembled, Feiyya silos are an economical solution suitable for a fixed installation, or for those who do not require specialized machinery for mobile sites such as horizontal silos.
Cement and lime silos are equipped with a gravimetric electronic weighing system with decreasing load cells which allow: (1) the unloading of the material by deduction weighing,( 1996031,2) the setting of automatic unloading programs,( 1996032,3) the automatic management of the vibrator,( 1996033,4) the control of the purchased quantities,( 1996034,5) the control of the remaining quantities.
Cement and lime silos are equipped with an adjustable timer discharge system which allows: (1) the discharge of the material in volumetric mode,( 1996035,2) the setting of the timer scale in seconds, minutes or hours,( 1996036,3) the additional management of the discharges in fully manual start/stop mode.
Cement and lime silos,Lime Storage Systems,Cement Silo,Eco-Friendly Lime Silos,Industrial Silo Systems Wuxi Feiyiya Environmental Protection Technology Co., Ltd. , https://www.feiyya.com
On May 30, 2017, the IEC released the 2017 version of the IEC60598-2-17 "Lamps - Part 2-17: Special Requirements - Stage Lighting, Television, Film and Photography (Indoor and Outdoor)" (2nd Edition) ). IEC 60598-2-17:2017 specifies requirements for stage, television, film and photo studio lighting (including spotlights and floodlighting) using electric light sources, power supply voltages up to 1000V, and for outdoor and indoor use. The second edition canceled and replaced the revisions of the first and 1990 editions published in 1984. This edition is a technical revision. This edition contains the following major technical changes to the previous version: a) Scope of application from source to electric source, and the use of electric light sources in place of tungsten, tubular fluorescent lamps and other discharge lamps. b) Considering many special cases of many LED lamps, such as irreplaceable light source, no glass bulb, or lower operating temperature, the relevant provisions have been modified. The relevant provisions will only apply to light source replaceable lamps and glass bulbs. The light source of the shell, or a fixture with a high surface temperature. For film and television stage lighting that has already used LED light sources in a large amount, the above-mentioned standard modification means loosening the LED lamps, which is conducive to the development and application of LED lighting products for film and television stage.