Sharpening is an indispensable preparation procedure before drawing die. According to the introduction, the rotary forging machine has been used in the coarse wire rolling abroad. It is also useful for electric rolling, that is, the two ends of the wire are clamped with electric pliers, and then the wire is stretched into a point and broken. At present, all the domestic use of rolling rod tip, mainly the reciprocating rotary old rolling machine and eccentric rolling machine cycle rotation. Another lever manual reciprocating small tip rolling machine, specially for 1 mm below the use of fine steel wire.
Fold and edit the structure of this section sharpening machine
The reciprocating rotary tip rolling machine is used for decades of old equipment, simple structure, suitable for small factories and production of low carbon steel wire.
This equipment is composed of three parts: transmission, frame and rolling stick. It is reduced by belt wheel and gear, and the big gear rotates about 60 times per minute. A short eccentric shaft is attached to the side of the big gear, which makes the rolling stick rotate around 50° through the arm and connecting rod. If the position of the arm and the connecting rod is changed, the Angle of the rolling rod can be changed.
This old fashioned bar is 100~120 mm in diameter and has 8~16 slots. According to the diameter of the wire, slot from large to small in order. Slot compression rate is: coarse steel wire about 20%, medium and fine specification about 15%. The slot is concentric and symmetrical with the outer circle.
The working principle of the sharpening machine is shown in the figure below.
sharpening machine,bar pointing machine,sharpening machinery,tip rolling machine Jiangyin Wanyi Machinery CO.,Ltd , https://www.wydrawmachine.com
2. 12V, 2.5KW, CW 11Teeth pionion
3. Used On: Komatsu Lift Trucks FD20 w/ 4D95S Diesel Engines.
4. Part No: 028000-997, 600-813-1420
3.MOQ:20PCS
4.Warranty:1 year
90% spare parts self production.
27 years famous brand OEMÂ factory
Cross reference:
Â
OEM
OEM Reference
Product Type
DENSO
1280009970
Starter, 12v, 2.5kW, 11t
DENSO
1280009971
Starter, 12v, 2.5kW, 11t
DENSO
1280009972
Starter, 12v, 2.5kW, 11t
OEM(s):Denso, Komatsu
Type: OSGR
Voltage: 12 Volts
kW: 2500 Watts
Rotation: CW
Teeth/Splines: 11 Teeth/Splines
Pinion/Splines OD: 38mm / 1.496in
Mounting Hole 1: 13.0mm ID
Unthreaded
Mounting Hole 2: 13.0mm ID
Unthreaded
Approximate Weight: 19.49 lbs / 8.86 kg
Company profile:
Jiangsu Xingyao Motor Co., Ltd.
Experiences:
Established in 1988, concentrating on starters for 27 years.
Location:
Located at Changzhou, Jiangsu, China.(Nearby Shanghai)
Main Products:
Professional in the production of car starters, diesel engine starters and accessories.
Main Market:
Her products are supplying to many big diesel factories at home, such as Changchai, Quanchai, etc;Also exporting to Southeast Asia, America and other areas.
Strong Production R&D Level:
More than 300 employees, 18 engineers, 20 sets experimental installation, 60 sets quality inspection equipments.Yearly capacity more than 1, 000, 000 sets.
Certificates:
ISO9001, TS16949 quality system.SGS certified company.
Philosophy:
"Science and Technology" makes competitive products, quality makes customers satisfied.
Working Policy:
"Advance, contribution, creativity, preciseness and competitiveness".
Social Contribution:
"Top Ten Taxpayers " to the government for 5 years.
Our development machines pictures for your reference.
We are willing to develop new starters for customers.
Welcome to contact us for co-operation.
FAQ:
1.Are you a manufacture?
Yes, we are manufacture for 27 years.
2.What is your MOQ?
For the starter we have stock, you can even buy a sample for quality checking.
If we daily producing items, for save your shipment charges, MOQ 20-70sets.
3.What is your package?
We can use export box or as per your request.
4.What is your lead time?
For the regular items, we can deliver within 30 days even quicker that this time if we are producing everyday.
For the items we need to produce, we can finish in 3 months.
5.What is your working time?
We will reply your inquiry in 1 hour on working time.If not working time, we will reply you in 8 hours.
6. How about the package?
    Generally we export product with neutrial brown or colour box.
    certainly we also do clients' package or original package for each product according to clients'  requirement after our clients give us their packing design
Welcome to visit our factory!
Welcome to send inquiry to us!
Sincerely hope we can become partner.
Â
1. Starter - Nippondenso OSGR
2. 12V, 2.5KW, CW 11Teeth pionion
3. Used On: Komatsu Lift Trucks FD20 w/ 4D95S Diesel Engines.
4. Part No: 028000-997, 600-813-1420
3.MOQ:20PCS
4.Warranty:1 year
90% spare parts self production.
27 years famous brand OEMÂ factory
Cross reference:
Â
OEM
OEM Reference
Product Type
DENSO
1280009970
Starter, 12v, 2.5kW, 11t
DENSO
1280009971
Starter, 12v, 2.5kW, 11t
DENSO
1280009972
Starter, 12v, 2.5kW, 11t
OEM(s):Denso, Komatsu
Type: OSGR
Voltage: 12 Volts
kW: 2500 Watts
Rotation: CW
Teeth/Splines: 11 Teeth/Splines
Pinion/Splines OD: 38mm / 1.496in
Mounting Hole 1: 13.0mm ID
Unthreaded
Mounting Hole 2: 13.0mm ID
Unthreaded
Approximate Weight: 19.49 lbs / 8.86 kg
Company profile:
Jiangsu Xingyao Motor Co., Ltd.
Experiences:
Established in 1988, concentrating on starters for 27 years.
Location:
Located at Changzhou, Jiangsu, China.(Nearby Shanghai)
Main Products:
Professional in the production of car starters, diesel engine starters and accessories.
Main Market:
Her products are supplying to many big diesel factories at home, such as Changchai, Quanchai, etc;Also exporting to Southeast Asia, America and other areas.
Strong Production R&D Level:
More than 300 employees, 18 engineers, 20 sets experimental installation, 60 sets quality inspection equipments.Yearly capacity more than 1, 000, 000 sets.
Certificates:
ISO9001, TS16949 quality system.SGS certified company.
Philosophy:
"Science and Technology" makes competitive products, quality makes customers satisfied.
Working Policy:
"Advance, contribution, creativity, preciseness and competitiveness".
Social Contribution:
"Top Ten Taxpayers " to the government for 5 years.
Our development machines pictures for your reference.
We are willing to develop new starters for customers.
Welcome to contact us for co-operation.
FAQ:
1.Are you a manufacture?
Yes, we are manufacture for 27 years.
2.What is your MOQ?
For the starter we have stock, you can even buy a sample for quality checking.
If we daily producing items, for save your shipment charges, MOQ 20-70sets.
3.What is your package?
We can use export box or as per your request.
4.What is your lead time?
For the regular items, we can deliver within 30 days even quicker that this time if we are producing everyday.
For the items we need to produce, we can finish in 3 months.
5.What is your working time?
We will reply your inquiry in 1 hour on working time.If not working time, we will reply you in 8 hours.
6. How about the package?
    Generally we export product with neutrial brown or colour box.
    certainly we also do clients' package or original package for each product according to clients'  requirement after our clients give us their packing design
Welcome to visit our factory!
Welcome to send inquiry to us!
Sincerely hope we can become partner.
Â
Model NO.: 128000-997 /19747
OEM Code: Lester 19747
Application for: Komatsu Lift Truck
Other Reference: 128000-997
Place of Origin: Changzhou
Warrenty: 1 Year
Brand: Xingyao Motor
Trademark: Xingyao Starter
Transport Package: Nuetral Packing or as Per Cutsomer
Specification: 12V 2.5kw 11T CW, 2.5kw, 12V, Cw 11t
Origin: Changzhou, China
HS Code: 851180000
Model NO.: 128000-997 /19747
OEM Code: Lester 19747
Application for: Komatsu Lift Truck
Other Reference: 128000-997
Place of Origin: Changzhou
Warrenty: 1 Year
Brand: Xingyao Motor
Trademark: Xingyao Starter
Transport Package: Nuetral Packing or as Per Cutsomer
Specification: 12V 2.5kw 11T CW, 2.5kw, 12V, Cw 11t
Origin: Changzhou, China
HS Code: 851180000
1. Starter - Nippondenso OSGR