Multi - Line Bag Vacuum Feeding Machine hangzhou mankun imp. exp. co., ltd. , https://www.multihz.com
In recent years, with the modernization of China's mining machinery and equipment, as the over-length roller products with large market consumption, most of them rely on imports. Hebei Jingxian Xinghua Metal Rubber Products Factory has developed a new PTS high-strength all-plastic steel roller with a diameter of 890mm, 108mm and a length of 1600mm by applying the newly developed PTS material formula and unique production technology. . The product has filled a gap in China.
According to reports, the product has anti-static, flame retardant performance, high impact strength, wear resistance, long service life, small rotational inertia, energy saving and other characteristics. Its tensile strength reaches 400Mpa, elongation at break reaches 30%, and hardness exceeds 78Hra. The product has been proved by the actual use of mines, coal mines and other industries. The over-length 1600mm PTS full-plastic steel idler has three times the wear resistance of the steel idler under the condition of water operation; in the case of low wear operation, the service life is not less than After 5 days, the mechanical properties of the machine are still more than 60% after 10 years in the open air, and it is corrosion-resistant. Generally, the acid and alkali substances have no corrosive effect on them, and can be used in various environments. In particular, the product has the characteristics that the product has a notched impact resistance of 25KJ/m2 and does not cause cracking. The temperature range can be used normally within -20 °C~50 °C.
1600PTS full-plastic steel roller with high wear resistance, corrosion resistance and high impact resistance, which can be widely used in large-scale conveying machinery in metallurgical mines and other industries. It was successfully developed and put into operation by Jingxian Xinghua Metal Rubber Products Factory of Hebei Province. market. Relevant experts believe that the product has been tested by the National Chemical Construction Material Inspection Center. The technical indicators are superior to the rubber and steel rollers commonly used in transportation machinery. The quality can be comparable with similar foreign products, and the market prospect is broad.