Model NO.: Marine Mooring Winch
Running Mode: Moving
Feature: Antiseptic
Certification: CE, ISO 9001
Standard: National Standards
Mooring Winch Specification: 1000kn Hydraulic Marine Winch&Towing Winch
Upper Drum: 1000kn at 0~6 M/Min(1st Layer)
Capacity of The Rope: 750m
Dia of Steel Wire Rope: 48mm
Hydraulic Motor: Staffa
Trademark: HANGYU
Transport Package: as Request
Specification: CCS
Origin: China
Description

This marine hydraulic anchor windlass mostly Drive by hydraulic pressure, hydraulic pump provide motives for the system, promote the hydraulic motor running, pass to the pinion gear which installed on motors axle end, pinion gear promote bull gear to slow running.The bull gear connect with principal axis, principal axis running promote gypsy wheel through hand-operated proportional valve to control hydraulic motors positive and reverse rotation, speed-up and speed-down, accomplish the work of drop and weigh anchor.Its one side equipped with a warpingbarrel, increase greater convenience for ship to moor and dock.

Weare the professional manufacturer, which specialized in producing Boat Accessories
Windlasses and winches
Electric combined windlass mooring winch
Horizontal Windlass; Vertical Windlass
Electric Capstan
Foot Switch; Weather Cover; Chain Stopper

5ton electric towing winch, wrie rope speed: 28m/min, motor power: 30kw, soft start, wire rope dia 22mm
5ton electric winch, auto winch, car winch, wrie rope speed: 28m/min, motor power: 30kw, soft start, wire rope dia 22mm,

We can supply 3ton -- 50ton slow/fast winch, resistance for soft start, running more smooth, safety
Specification 1000kN Hydraulic Marine winch&Towing Winch
Mooring Winch Double drums in waterfall arrangement.Auto spooling device for towing.
Towing Upper drum
Rated pull&Speed 1000kN at 0~6 m/min(1st layer)
Capacity of the rope 750m
Dia of steel wire rope 48mm
Brake holding 1500kN(1st layer),band type,Hydraulic operated with manual release(safe brake)
Clutch Hydraulic claw clutch
Hydraulic motor Staffa
Anchoring Under Drum
Rated pull&Speed 1000kN at 0~6 m/min(1st layer)
Capacity of the rope 750m
Dia of steel wire rope 48mm
Brake holding 1500kN(1st layer),band type,Hydraulic operated with manual release(safe brake)
Clutch Hydraulic claw clutch
Hydraulic motor Staffa
Power pack Electro-Hydraulic power pack with Kawasaki pumps.
Control local controls stand and drop-in panel at remote wheelhouse control
Class ABS CONSULTING,BV,CCS,etc.


Electro-Hydraulic Power Pack Marine Mooring Winch 1000kn
Electro-Hydraulic Power Pack Marine Mooring Winch 1000kn
 

Heat Shrinkable Pipe Coating

Anti-corrosion Heat Shrink Sleeve is a hand wrapped heat shrinkable tape designed for corrosion protection of straight pipes, fittings, bends, elbows and other irregular configurations.
When heated the backing layer shrinks and the adhesive flows and forms a reliable corrosion protection seal onto metal and adjacent coating surfaces.

Shrink Wrap Pipe Coating,Pipe Heat Shrink Wrap,Heat Shrink Sleeve Joint Coating

JINING XUNDA PIPE COATING MATERIALS CO.,LTD , https://www.xundapipelinetape.com