SKYELEC Heater Rod Thermostats are suitable for use with Single Phase to control heating in electroplating baths.They are equipped with a 1.6 metre supply cord and standard red cap terminal casing.
The temperature control probe is suitable for automatic control of a pre-set value in the process media and are suitable for heaters up to 2.3 kw single phase. For higher loads, or three phase heaters an additional contactor should be used.
The probes construction makes it ideally suited for etch, pickle and plating solutions. Its robust construction and chemical resistance ensures a long service life. To set the rod thermostat, unscrew the red cover which provides access to the temperature setting control knob. Turn until the desired temperature is opposite the arrow.
Suitable for use with single phase to control heating of electroplating baths and similar solutions.
PT100 Temperature Control, Heater Rod Thermostats, Electroplating Temperature Control Guangzhou Quanxu Technology Co Ltd , https://www.silicamattingagent.com
Phosphogypsum is a waste material in the production process of many phosphate fertilizer plants and has long been treated with landfills, causing pollution to the environment. In response, they developed a special dryer for phosphogypsum. The phosphogypsum powder produced can replace natural gypsum powder for the production of gypsum plasterboard. It has both good strength and fine adjustment of indoor air temperature. Ideal decoration material for interior decoration.
Not only turn waste into treasure, it solves environmental problems. Due to the long drying time, loss of pigment components, high energy consumption, and low output, pigment pepper production has always been a problem that plagued production companies. In this regard, they independently developed a new generation of high-performance pigment pepper dryer. According to a number of users, the mechanical drying time was shortened by 2-3% compared with similar equipment, energy consumption was reduced by 40%, and the unit output was increased by more than 60%. In particular, due to the rapid completion of the drying process, the pigments in peppers are well preserved, minimizing the loss of pigments. At the same time, through the adoption of recycled water to absorb the spicy new technology in production, the effect of spicy flavor on the atmospheric environment during the production process is solved, and the product recovery rate is greatly improved.
The foothold of independent innovation of enterprises should be driven by the market. Only by adapting to the market can we satisfy the market. The new type of vibrating fluidized bed drying equipment developed by them, through the application of the frame design structure, fundamentally eliminates the cracking phenomenon of the steel plate that is difficult to avoid in the van structure, increases the service life by more than two times, and adopts up and down the entire machine. Body combination reduces the weight of equipment vibration and reduces energy consumption by 20%. The XF series cyclone flash dryer developed and produced by them can effectively handle the heat-sensitive materials with high moisture content and high viscosity, which are difficult to solve in chemical production. The indicators and parts of the equipment exceed the requirements of the Danish APV Anhalano company. Technical indicators. The improvement of independent innovation capability has enriched the high value-added product categories of North China Drying Equipment Factory, greatly promoting the overall upgrade of product quality. At present, among the top ten series of products produced, new products account for more than 60%. Among them, products with independent intellectual property rights have reached four major series of nearly 60 specifications and models. High-quality chemical production equipment is not only favored by domestic users, but also exported indirectly to Southeast Asia and other international markets.
Comes complete with heavy duty terminal box and adjustable mounting blocks ready for connection.
Available in: Stainless steel, Titanium, Mild Steel or PTFE.
Alternative lengths are available to order.
The units incorporate an integral 25 amp rated thermostat unit housed with a chemically resistant, PVC coated steel terminal box, complete with quick fix brackets.
The thermostat opens on a rising temperature. Range: 25°C to 100°C. They are suitable for up to 6 kw heaters on a single phase supply. For higher loads or a three phase supply an additional contactor should be used.
The control knob is situated outside the PVC coated terminal box.
In recent years, with the acceleration of the modernized production pace of the chemical industry in China, how the chemical equipment manufacturing industry has increased its ability to independently innovate has become a serious issue for many manufacturers. North China Drying Equipment Factory aims to create a variety of chemical equipment with corporate characteristics and comprehensively increase the development of new products. They focus on R&D, production, and sales of superior capabilities, strengthen market research, formulate technical standards, optimize process flow, monitor development costs, stringent quality inspections, and achieve integrated production, sales, and research goals.