Double Layer Steel Galzed Tile Roofing Roll Forming Machine

double layer steel galzed tile roofing rolling forming roll former maching's technical parameters:
Length of the main part About10500*1650*1500mm
Weight of main part About 9.5 ton
Voltage 380V/50HZ3Phase (as customer`s request)
Roller fixer Middle plate welded
Frame 350H steel welded
 Middle plate thickness 20mm/18mm/16mm/14mm/12mm
Drive mode Chain Drice//Gear Drive
Material of rollers 45# steel, surface hard chromium plating.
 Material of shafts 45# steel
Diameter of shafts Φ80mm(depend on defferent design)
Number of rollers: 29 rollers    
Main power 5.5kw
Cutting&Hydraulic Double guide pillar
Hydraulic motor power 3kw,4kw
Hydraulic Pressure 10-12MPa
Cutting  drive   Decelerating motor + Chain drive  gear all by high-frequency
Control System PLC system: Mitstubishi, Panasonic,Detal,Siemens,Schneider
Feeding Material width Better as your drawing or from our designer
Feeding Thickness 0.8~1.5mm
Effective width Better as your drawing or from our designer
Productivity 8-12/min
Package of machine Waterproofing membrane, standard export packing

double layer steel galzed tile roofing rolling forming roll former maching's advantages

double layer steel galzed tile roofing rolling forming roll former maching's produce flow

double layer steel galzed tile roofing rolling forming roll former maching's details
motor power:4.5kw~27.5kw

• Direct customers to our company personally test our equipment
• Our engineers accompanied the test machine until the customer satisfaction
• Our engineers free of charge for customer training guide customers to operate and maintain equipment
• Customers can ask engineers to client countries for machine installation and commissioning,clients pay the fleight cost and the cost of our engineer (usd80/day/person).

Contact person: Alan
 
 

FAQ

1. Q:Are you a manufacturer?
   A:Yes absolutely. Welcome a lot for your visiting to us.

2. Q:What's the delivery time?

   A:Normaly will take 60days, for small lines will take 30 days.

3. Q:Do you have after-sale support?

   A:Yes, we're always here for giving you advice and support for technical details since we have senior technician. 

4. Q:Is there quality control when manufacturing the lines?

   A:Yes, we have a group of team who will be responsible for quality control from laying off the raw material, processing the rollers and the other parts, make treatment on the roller surface and shaft, assembling, testing and packaging.

5. Q:What's your strength comparing to the other supplier?

   A:We'll supplying you the best quality and service. We'll give you good advise beyond your requirements. The lines are easily for installation and with low mantenance requirements.

6. Q:Can we be your agency abroad?

   A:Surely if you have business for roll forming lines and we will welcome a lot for cooperating together.

double layer steel galzed tile roofing rolling forming roll former maching's technical parameters:
Length of the main part About10500*1650*1500mm
Weight of main part About 9.5 ton
Voltage 380V/50HZ3Phase (as customer`s request)
Roller fixer Middle plate welded
Frame 350H steel welded
 Middle plate thickness 20mm/18mm/16mm/14mm/12mm
Drive mode Chain Drice//Gear Drive
Material of rollers 45# steel, surface hard chromium plating.
 Material of shafts 45# steel
Diameter of shafts Φ80mm(depend on defferent design)
Number of rollers: 29 rollers    
Main power 5.5kw
Cutting&Hydraulic Double guide pillar
Hydraulic motor power 3kw,4kw
Hydraulic Pressure 10-12MPa
Cutting  drive   Decelerating motor + Chain drive  gear all by high-frequency
Control System PLC system: Mitstubishi, Panasonic,Detal,Siemens,Schneider
Feeding Material width Better as your drawing or from our designer
Feeding Thickness 0.8~1.5mm
Effective width Better as your drawing or from our designer
Productivity 8-12/min
Package of machine Waterproofing membrane, standard export packing

double layer steel galzed tile roofing rolling forming roll former maching's advantages

double layer steel galzed tile roofing rolling forming roll former maching's produce flow

double layer steel galzed tile roofing rolling forming roll former maching's details
motor power:4.5kw~27.5kw

• Direct customers to our company personally test our equipment
• Our engineers accompanied the test machine until the customer satisfaction
• Our engineers free of charge for customer training guide customers to operate and maintain equipment
• Customers can ask engineers to client countries for machine installation and commissioning,clients pay the fleight cost and the cost of our engineer (usd80/day/person).

Contact person: Alan
 
 

FAQ

1. Q:Are you a manufacturer?
   A:Yes absolutely. Welcome a lot for your visiting to us.

2. Q:What's the delivery time?

   A:Normaly will take 60days, for small lines will take 30 days.

3. Q:Do you have after-sale support?

   A:Yes, we're always here for giving you advice and support for technical details since we have senior technician. 

4. Q:Is there quality control when manufacturing the lines?

   A:Yes, we have a group of team who will be responsible for quality control from laying off the raw material, processing the rollers and the other parts, make treatment on the roller surface and shaft, assembling, testing and packaging.

5. Q:What's your strength comparing to the other supplier?

   A:We'll supplying you the best quality and service. We'll give you good advise beyond your requirements. The lines are easily for installation and with low mantenance requirements.

6. Q:Can we be your agency abroad?

   A:Surely if you have business for roll forming lines and we will welcome a lot for cooperating together.