The docking garbage truck is also called a docking garbage truck for a garbage compression station. It is a special vehicle used for the transportation and unloading of garbage in urban garbage compression stations. The box body of the vehicle adopts the high-quality carbon steel plate sealed and welded structure, which has the advantages of high strength, light weight, and no secondary pollution. The following are the steps of the docking garbage truck. Garbage loading step 1: Push the rear door operating handle to the open position, and the wallboard cylinders on the left and right sides of the box are extended so that the rear door of the box is first pushed out horizontally and then opened upwards, and the operating handle is released to return it to the neutral position; Garbage loading step 2: After the rear door is opened, the garbage truck is docked with the compression box door, and the garbage is pushed horizontally from the compression box into the carriage. After the garbage is loaded, the garbage truck is released from the docking state and the rear door operation handle is pushed to the closed position. The cylinders on both sides of the wall are retracted, the rear door is turned downwards, and finally the rear door is horizontally pulled back tightly, releasing the operating handle to return it to the neutral position. Garbage dumping: When the vehicle's operation reaches 6 standard air pressures, the power take-off device is hung, and after checking whether there are any leaks or abnormalities in each component, operate according to the position indicated by the operation signboard; step one: 1 Push the rear door operating handle to the open position, and the wall cylinders on the left and right sides of the box are extended so that the rear door of the box can be pushed out horizontally after a certain distance; open the operating handle back to the neutral position; 2 Push the dump handle to the raised position. The self-unloading cylinder extends. The trash can rotates around the turning axis. The trash can forms the self-discharging angle. The trash is discharged from the box and the handle is released by releasing the dump handle. To the median; Step 2: After the garbage is unloaded 1 Push the dump handle into the drop position, retract from the dump cylinder, rotate the rubbish bin around the turning axis, put the rubbish bin back on the attached frame, and release the dump handle to return to the neutral position; 2 Push the rear door operating handle to the closed position, the wall cylinders on the left and right sides of the box are retracted, the rear door is turned downwards, and finally the rear door is horizontally pulled back and closed tightly, releasing the operating handle to return it to the neutral position. Loosen the power take-off bin and place it. The vehicle can be driven. [Recommended for butt-type garbage truck models] Futian docking garbage truck, Dongfeng single bridge butt garbage truck, Dongfeng CLW5142ZDJT3 docking garbage truck, Dongfeng Tip 140 docking garbage truck, Auman 17 tons docking garbage truck, Dongfeng 18 tons Docking garbage truck | Dongfeng 153 docking garbage truck, Dongfeng 9 tons docking garbage truck, Dongfeng 11 tons docking garbage truck, Dongfeng tip 8 tons docking garbage truck, Dongfeng 153 docking garbage truck and so on. Epoxy Curing Agents & Accelerators
Kylin Chemicals has been focusing on R&D, manufacturing and supply of specialty additive technologies to epoxy resin industry for over 20 years. Our novel technologies are marketed & supplied under the trade name KylinCure, serving our customers in the field of composites, coatings, adhesives and electric industries, etc. KylinCure is a group of substituted urea based accelerator for dicyandiamide-cured epoxy resins, significantly reduces the curing temperature without sacrificing the shelf life of the compounds.
Epoxy Curing Agents & Accelerators,Curing Agents For Epoxy Resin,Epoxy Curing Accelerating Agent Kylin Chemicals Co., Ltd. , https://www.kylin-chemicals.com
