1. Hazard source: The line condition has not been checked. Risk and its consequences description: 1 If the wire is dropped too low, it is easy to get an electric shock and the person can't pass normally. There are vehicles or pedestrians in the crossing and track line. 2 wear exceeded. 3 When the line is too high, it is easy for the locomotive to slide through the crossing when the electric vehicle is driven by the electric bow. The locomotive is easy to collide with the passing vehicle during the taxiing process. Pre-control measures: carefully check the integrity of the wiring. 2. Hazard source: The track condition has not been checked. Description of risks and their consequences: Vehicle derailment is prone to occur. Pre-control measures: carefully check the track. 3. Hazard source: Single lane transportation is not realized in 500 lanes during the transportation of the bracket. Description of risks and consequences: It is prone to collisions between vehicles. Pre-control measures: During the transportation of the brackets, one-way transportation must be carried out in the 500 lanes. Any casual personnel are strictly forbidden, and special personnel should be placed to guard them. 4, the source of danger: the locomotive is not in good condition to drive. Description of risks and consequences: It is easy to cause locomotive rear-end accidents. Pre-control measures: Check the brakes and sanding devices must be in good condition. 5, the source of danger: the bracket is biased, the binding is not strong. Description of risks and their consequences: prone to downfall accidents. Pre-control measures: The bracket should be loaded and balanced to ensure a balanced and stable center of gravity. The center of gravity is consistent with the center of the flatbed. The base is fixed with high-strength bolts, and the insulating material is laid on the top beam. The flatbed is in good condition. 6, the source of danger: attention is not concentrated when driving the locomotive. Description of risks and their consequences: prone to rear-end accidents leading to a drop. Pre-control measures: Attention must be concentrated when driving. 7, the source of danger: fast parking. Description of risk and its consequences: It is easy to cause the dump truck to dump. Pre-control measures: When the motor is stopped, the vehicle running speed is reduced smoothly. 8, the source of danger: the vehicle grabbed the crossing. Description of risk and its consequences: It is easy to cause collision of transport vehicles. Pre-control measures: When the vehicle passes through the intersection, you should watch the whistle, and follow the traffic light signal to drive. No pedestrians or vehicles can pass. 9. Hazard Source: There is no guardianship when handling the down road. Description of risk and its consequences: It is easy to cause objects to pop and hurt people. Pre-control measures: When handling locomotive or flat-car accidents, use special pick-up devices, vehicles to cover up, must have guardians to prevent people from standing in the wrong position, the vehicle turns over when hitting the road, hurting the staff. ,Household Stick Blender,Hand held Blender,Removable Hand Blender,Electric Hand Blender,Portable Baby food Grinder,Multi-purpose Stick Blender,vegetable Mixer NINGBO CHENGTUO ELECTRIC APPLIANCE CO.,LTD , https://www.chengtuoappliance.com
Danger source identification of motor vehicle frame