Model NO.: STW-SHEET 001
Power Source: Electric
Feature: Automation
Advantage: Simple Structure
Trademark: STW
Transport Package: Machine in 40′′gp,Other Accessories in Wooden Case
Specification: CE
Origin: China
HS Code: 84552210
1-Product Feature of 
The colored steel tiles produced by this machine look beautiful ,elegant and noble .They are widely used as the roof of garden ,factory ,hotel,exhibition center and villa ,etc .
 
No.       item Parameter(all is subject to our final design)
1
 
Suitable raw material Type Common galvanized & pre-painted steel
Yield strength 235MPa(or other high strength steel)
Thickness(mm) 0.4-0.7
width(mm) According to final design
2 Manual uncoiler's capacity Max.5tons
3 Forming speed(m/min) About 18-20m/min
4 Main motor power(KW) 7.5kw
5 Hydraulic power(KW) 3kw
6 Forming roller groups  Around19-20 groups
7 Raw material of forming roller High quality No.45 steel
8 Raw material of cutting blade Cr12mould steel with quenched treatment
9 controlling system Mitsubishi PLC& converter
10 Suitable industrial voltage  According to your special requirement
11 Machine dimensions(L*W*H) 6.8m×1.8m×1.52m
12 Machine weight About 9-10tons
 
 
2-Machine components 
Tile forming machine consist of uncoiler, coil sheet guiding machine ,covering film device ,main roll forming system, pressing device,cutting device,Hydraulic station ,PLC control system and support table .
Corrugated Roof Sheet Making Machine

3.Working flow
uncoiling the sheet---guiding the sheet---covering the film---roll forming punching the step---measuring the length---cutting the panel---panels to the supporter
Corrugated Roof Sheet Making Machine

Ti2AlN

Appearance: black powder
CAS:
Element: Ti, Al, N
Purity: by X-ray result
Molecular Weight: 136.72
Apparent Density (g/cm3): ---

Storage: dry seal preservation below 50 ℃.
Do not use if cap seal is broken.
Keep out of reach of children.
Storage conditions and validity:

This product should be stored in room temperature and dry place, avoid contact with acid, alkali and other liquids, long-term storage will happen slow oxidation.

Test method:

This product can be confirmed by X-ray powder diffractometer crystal results; Element composition was confirmed by energy dispersive X-ray detector. The same morphology characterization was used to characterize the particle morphology. The particle size distribution was evaluated by laser particle size analyzer.



Safety protection:

1. Health hazards

Hazardous category: Non-hazardous chemical chemical category: ceramic powder;

Route of invasion: inhalation, ingestion;

Health hazards: dust in the eye has irritation, oral stimulation of gastrointestinal tract;

2. First aid measures

Skin contact: Remove contaminated clothing and rinse skin thoroughly with running water.

Eye contact: lift eyelid and rinse with plenty of running water or normal saline for at least 15 minutes;

Inhalation: Get away from the scene to fresh air quickly;

Ingestion: drink enough warm boiled water, induce vomiting, seek medical advice;

3. Ignition and explosion characteristics and fire protection

Flammability: non-flammable;

Ti2Aln Powder,High Density Ti2Aln,Transition Metal Ti2Aln,Mixed Metal Ti2Aln

Jilin 11 Technology Co.,Ltd , https://www.11techmxene.com