Polyether Polyol,Calcium Formate,Phthalic Anhydride,Mono Ethylene Glycol HENAN BONSIN CHEMICAL CO.,LTD , https://www.bosinchem.com
Most of the automotive tires are made of rubber, and wear is serious. If you can maintain the tires, you can reduce the number of tire repairs and replacements, safe and economical, then what should we do during the maintenance of the tires?
1. Automobile tires, especially the front wheels, are very worn out, so you should regularly check the tire's wear. When observing, mainly observe whether the depth of the pattern on both sides of the tire is the same, especially the inner side of the tire. Carefully check if there is any abnormal wear. If the tire is really worn out, it should be replaced in time.
2. It is a good habit to clean the tires in time. When you are free or after the car has just passed muddy road conditions, you should promptly clean up foreign objects such as stones that are trapped in the tires. The presence of these foreign objects may puncture the tires on the one hand, and on the other hand, it may cause high-speed splashing of stones and damage to vehicles or pedestrians on the road.
3. After washing each car, use tires that can keep the rubber elasticity. Apply the entire bead again to make the rubber look moist. It not only looks beautiful and beautiful, but also has practical maintenance effect.
4. Regular tire exchange. The wear condition of the front and rear wheels of a car is obviously different. The amount of wear on the front wheels is much larger than on the rear wheels. Therefore, the regular exchange of the front and rear wheels of the car can make the wear evenly distributed to each tire. The diagonal exchange is commonly used.
5. If you don't use the car for a long time, it is better to think of ways to increase the height of the vehicle and allow the tire to leave the ground, because if the vehicle's heavy vehicle is pressed into a fixed position for a long time, it will cause the steel wire layer and the ply layer in this area to be damaged. Long-term compression and deformation, directly affect the roundness of the tire, will have an impact on driving safety and comfort.