Model NO.: BOSJ-H
Making Machine: Multifunctional
Material of Roller: Gcr 15
Trademark: BOSJ
Origin: Shanghai
HS Code: 8455212000
Two Thire Waves Highway Guardrail Roll Forming Equipment Dubai


A.Crash Barrier (also named Highway Guardrails, Road Barrier)
We can manufacture W Beam (Profile A), Profile B, and different types of steel posts (C Posts, U Posts, Sigma Posts) and blocks, we can also supply bolts, nuts and washers, reflector, cat's eye, and relevant components, etc.
We manufacture highway guardrails mainly according to those Standards below: 
a. JT/T 281-1995(Corrugated Sheet Steel Beams For Expressway Guardrail - China)
b. AASHTO-M180 (Corrugated Sheet Steel Beams For Highway Guardrail - USA)
c. RAL RG620 (Germany)
d. Or tailor-make according to client's requirements

Auto Thire Waves Guardrail Roll Forming Machine - Bosj
1. Types:
Type I. hot dip galvanized: 550 g/m2 (40µ)
Type II. hot dip galvanized:1100 g/m2 (80µ) or 1200 g/m2 (85µ)
2. Class:
Class A-1: 2.67 mm base metal nominal thickness, Steel Grade Q235 (equivalent to S235JR according to DIN EN10025 and Gr.D according to ASTM A283M)
Class A-2: 2.67 mm base metal nominal thickness, Steel Grade Q345 (equivalent to S355JR according to DIN EN10025 1994 and Gr.50[345] according to ASTM A529M)
Class B-1: 3.43 mm base metal nominal thickness, Steel Grade Q235 (equivalent to S235JR according to DIN EN10025 and Gr.D according to ASTM A283M)
Class B-2: 3.0 mm base metal nominal thickness, Steel Grade Q235 (equivalent to S235JR according to DIN EN10025 and Gr.D according to ASTM A283M)

B.Equipment structure:

De-coiler--- flatting --- punching --- fast feeding --- opto-electrical cutting --- forming --- alignment device --- collection table--- control system --- forming moulds
Auto Thire Waves Guardrail Roll Forming Machine - Bosj

Technique data:
1, Total power of equipment is 90kw
2, Maximum height of profiles formed: 85mm
3, Maximum thickness: 4.0mm
4, Maximum forming speed: 15m/min
5, The welding machine body structure follow to the requirement, the welding follow to the national welding standard.
6, The equipment after antirust processing, brush antirust paint first, the antirust paint must cover comprehensively, then brush the high quality finish paint. The movable part shows the different color for caution.
Auto Thire Waves Guardrail Roll Forming Machine - Bosj

NO. 		Project Unit Parameter Remark
 
1		  
Material		 Type   Mild steel\Galvanized sheet  
Strength of material sheet Map ≥350  
Thickness of material sheet mm 3~4  
2 Size of production mm    Reference the picture  
3 Production speed m/min 6  
4 Material of roller
 		   GCr15 quenching treatment  
5 Drive type   Gear box  
6 Power kw About 64  
7 Electric control system   PLC variable frequency control  
8 Dimensions(Length*width*height) m 35X4X3.9  

Motor End Cover

The die casting process involves the use of a furnace, metal, die casting machine, and die.

The metal, typically a non-ferrous alloy such as aluminium or zinc, is melted in the furnace and then injected into the dies in the die casting machine. After the molten metal is injected into the dies, it rapidly cools and solidifies into the final part, called the casting parts.

The castings that are created in this process can vary greatly in size and weight, ranging from a couple of ounces to 100 pounds. One common application of die-cast parts are housings - thin-walled enclosures, often requiring many ribs and bosses on the interior.

Metal housings for a variety of appliances and equipment are often die cast.

Several automobile components are also manufactured using die casting, including pistons, cylinder heads, and engine blocks. Most home appliances also need lightweight and firm aluminum die casting parts, like bracket, heat dissipation module or structural support. Other common die cast parts include propellers, gears, bushings, pumps, and valves.

Motor End Cover,Washing Motor End Cover,Aluminum Engine Cover,Washing Machine Motor Cover

Ningbo Sunlee Electrical Technology Co. , Ltd. , https://www.nbsunlee.com