We have a wide range of products under this category. In addition to car products, we also have boat covers. Car tent;Car Awning;Truck tent Ningbo Autrends International Trade Co.,Ltd. , https://www.acomparts.com
And we have all kinds of Special Cover you need, and the color and material are various, of course you can also customize, we can meet all your requirements.
We have a wide range of products under this category. In addition to car products, we also have boat covers.
And we have all kinds of special cover you need, and the color and material are various, of course you can also customize, we can meet all your requirements.
With the sound and rapid development of China's economy, and the research on new product development and new technologies in the above-mentioned related industries, the demand for new drying technologies is increasing. However, as far as China's current drying technology progresses, the overall technical level is still lagging behind. State, it is difficult to meet the needs of relevant industries due to economic development and product optimization structure and new product development. According to the market dynamic research and related information, the dry production of liquid materials with easy oxide materials and organic solvents in most pharmaceutical, biochemical, and fine chemical industries in China is still produced by vacuum entrainment heating. Vacuum drying, low boiling point (in the state of vacuum -0.085Mpa, when the heating temperature reaches 90 °C, the moisture is vaporized), and the oxidation resistance (vacuum drying by jacket heating, the heat transfer gas is not Direct contact with the material avoids the advantages of easy oxide material damage caused by oxidation during the drying process. Therefore, vacuum drying technology is still widely used in the above related industries. However, vacuum drying is a gap production with a single charge, so its production capacity is greatly limited, and at the same time, it is difficult to achieve recovery of the organic solvent in the drying process, thereby causing serious environmental pollution. Therefore, vacuum drying technology is difficult to meet the needs of contemporary related industries to optimize product structure and new product development and industrial production.