Introduction of magnetic separator  Magnetic separation is a continuous process by which magnetic material is separated from non-magnetic material. The mixture of magnetic and non-magnetic material is passed through a strong magnetic field. Magnetic material is magnetized and gets attracted to the surface of the separator and is discharged in a chute. Electromagnetic Type (with control panel):adopts rare earth magnet and ferrite magnet to form its permanent magnetic system Permanent Type (without control panel): adopts excitation coils to form its electromagnetic system. magnetic separator is usually used in continuous duty occasions with plenty of iron materials. Manual Discharge Type (without motor and belt) Self-Discharging Type (with motor and belt) Cooling Type: (just for electromagnetic type) Permanent magnetic plate, Belt , Motor, Iron frame. Technical Data of  magnetic separator Model No. Adaptive belt width Suspension height Magnetic intensity Thickness of materials Motor power Adaptive belt speed Duty type Weight Outline dimensions (mm) A B C D E RCYD(C)-5 500 150 320 80 1.5 4.5 continuous 450 1900 710 935 950 753 RCYD(C)-6 600 175 320 120 1.5 620 2050 710 1020 1050 753 RCYD(C)-6.5 650 200 320 150 1.5 900 2050 728 1020 1200 888 RCYD(C)-8 800 250 320 200 2.2 1100 2250 750 1300 1350 1090 RCYD(C)-10 1000 300 320 250 3.0 1820 2650 889 1550 1450 1335 RCYD(C)-12 1200 350 320 300 4.0 3050 2860 1010 1720 1550 1515 RCYD(C)-14 1400 400 320 350 4.0 4150 3225 1050 1980 1800 1755 RCYD(C)-16 1600 450 320 400 5.5 5900 3350 1180 2160 1950 1850 RCYD(C)-18 1800 500 350 450 5.5 7800 3580 1210 2450 2200 2130 RCYD(C)-20 2000 550 350 500 7.5 9400 3800 1300 2700 2400 2410 Victor is a large mineral processing manufacturer for 15 years history, with covering an area of 48,000 square meters and 20,000 square meters for workshop, with various large modernized machinery facilities, professional R&D team and installation team. Our Services 1. One year guarantee. 2. Sample testing. 3. our technician can design your project based on your information such as flow chart. 4. Engineer available for over seas installation and training. 5. after sale service, such providing spared parts. FAQ Q: Are you a manufacturer of spiral chute? A: Yes, we are manufacturer of spiral chute and have our own factory, located in Shicheng, Ganzhou, Jiangxi. Q: What is the warranty of spiral chute? A: 1 year.  Q: will you help to install spiral chute machinery? A: If you need, we will have our technicians to assist you for installation.  Q:Could your company provide customized products? A: Yes. OEM is welcome. Introduction of magnetic separator  Magnetic separation is a continuous process by which magnetic material is separated from non-magnetic material. The mixture of magnetic and non-magnetic material is passed through a strong magnetic field. Magnetic material is magnetized and gets attracted to the surface of the separator and is discharged in a chute. Electromagnetic Type (with control panel):adopts rare earth magnet and ferrite magnet to form its permanent magnetic system Permanent Type (without control panel): adopts excitation coils to form its electromagnetic system. magnetic separator is usually used in continuous duty occasions with plenty of iron materials. Manual Discharge Type (without motor and belt) Self-Discharging Type (with motor and belt) Cooling Type: (just for electromagnetic type) Permanent magnetic plate, Belt , Motor, Iron frame. Technical Data of  magnetic separator Model No. Adaptive belt width Suspension height Magnetic intensity Thickness of materials Motor power Adaptive belt speed Duty type Weight Outline dimensions (mm) A B C D E RCYD(C)-5 500 150 320 80 1.5 4.5 continuous 450 1900 710 935 950 753 RCYD(C)-6 600 175 320 120 1.5 620 2050 710 1020 1050 753 RCYD(C)-6.5 650 200 320 150 1.5 900 2050 728 1020 1200 888 RCYD(C)-8 800 250 320 200 2.2 1100 2250 750 1300 1350 1090 RCYD(C)-10 1000 300 320 250 3.0 1820 2650 889 1550 1450 1335 RCYD(C)-12 1200 350 320 300 4.0 3050 2860 1010 1720 1550 1515 RCYD(C)-14 1400 400 320 350 4.0 4150 3225 1050 1980 1800 1755 RCYD(C)-16 1600 450 320 400 5.5 5900 3350 1180 2160 1950 1850 RCYD(C)-18 1800 500 350 450 5.5 7800 3580 1210 2450 2200 2130 RCYD(C)-20 2000 550 350 500 7.5 9400 3800 1300 2700 2400 2410 Victor is a large mineral processing manufacturer for 15 years history, with covering an area of 48,000 square meters and 20,000 square meters for workshop, with various large modernized machinery facilities, professional R&D team and installation team. Our Services 1. One year guarantee. 2. Sample testing. 3. our technician can design your project based on your information such as flow chart. 4. Engineer available for over seas installation and training. 5. after sale service, such providing spared parts. FAQ Q: Are you a manufacturer of spiral chute? A: Yes, we are manufacturer of spiral chute and have our own factory, located in Shicheng, Ganzhou, Jiangxi. Q: What is the warranty of spiral chute? A: 1 year.  Q: will you help to install spiral chute machinery? A: If you need, we will have our technicians to assist you for installation.  Q:Could your company provide customized products? A: Yes. OEM is welcome. Dot peen marking works by electromechanically striking a carbide or diamond stylus assembly against the surface of a part to be marked.For example,dog tag engraver.The result is a succession of dots to create digits, text, logos, and 2D data matrix codes. Each such dot is the result of a pulsed current that runs through a solenoid, punches a magnet toward the surface, and subsequently returns the stylus to its starting position, awaiting the next pulse. Because each pulse occurs in only a fraction of a second, an entire 2D data matrix code, for example, can be completed in seconds (depending on the size).
Compressed air is not required.
Dot Peen Marking Machine,Pnematic Dot Peen Marking Machine,Pneumatic Marking Machine,Dot Markers,Dot Peen Marker,Dog Tag Engraver Wuhan HAE Technology Co., Ltd. , https://www.whwallprinter.com
The efficiency of the separator depends upon the strength of the magnet and the speed of the Conveyor. The length of the magnet is designed such that the magnetic material is in the magnetic field for a period of 0.4 to 0.5 secs. Strontium Ferrite permanent blocks are used in the magnet assembly to achieve a surface gauss of 2500.
The gap between the magnet and the conveyor is adjustable. Lower the gap, better the separation efficiency. Individual drive is used for the separator and the conveyor. Adjustable stainless steel splitters are provided between the two chutes. Vibrating feeder with two unbalance motor is also provided, which ensures that the material spreads across the belt to achieve better separation. We can supply belt type separators for a belt width of 650 mm to 2000 mm.
Classification of magnetic separatorDischarging Type of magnetic separator
--Air CoolingÂ
--Oil Cooling
--Fan Cooling
Operating Principle
The magnetic & nonmagnetic material is passed under the Magnetic Separator by a conveyor. The mixture is fed on to the conveyor evenly by the help of a feeder. Under the influence of the magnetic field the magnetic material is attracted upwards, towards the magnet face. The attracted material is carried along the cleated belt of the Separator and is continuously discharged in the magnet chute. The other material with is carried by the bottom conveyor and discharged in the non mag chute.
1. Excellent magnetic field intensity, Used to remove iron particles from material
Features of magnetic separation equipment
2. The wholly sealed structure makes the remover water-proof, dust-proof and corrosion resisting.
3. Low energy consumption.Application of belt electromagnetic separation
widely used in mining ore, limestone, hard coke, cement, chemicals, plastics, coal, refractory , building materials, food and other industries.
Components of magnetic separator
Sketch installation drawing of magnetic separator
Model Selection
1. Before choosing, you should pay attention to whether to convey the tape, bandwidth, inclination, material properties, humidity, and thickness, the amount of iron in the material, the nature of the ferromagnetic material, the requirements of iron removal and the environment used, etc. a kind
2.When there is more iron, you should choose RCDC, RCDD, RCDF series;
3.When the iron content is small, you should choose RCDA, RCDB, RCDE series;
4. When using suspended electric and permanent magnet iron remover, if the material is very thick, it can be used with the WCTG series of five parallel rollers, which can improve the iron removal rate and achieve the ideal iron removal effect;
5.When the material contained in the material cannot be adsorbed by the iron remover, the metal detector should be used to detect the metal, and the automatic iron removal should be performed after the automatic shutdown.
(mm)
(h≤mm)
(≥mT)
(≤mm)
(kw)
(≤m/s)
(kg)
Company Information
Our goal is to provide one-stop service for you and assist you to solve all problems from investment to his return in the field of mining, including the preliminary mineral analysis, mineral processing test, engineering design, equipment debugging and technical training etc..Â
We are expert especially at mining separating and lab mining plant, main products as below:
Gold trommel wash plant
Shaking table
Spiral chute separator
Centrifugal gold concentrator
Jig separator machines
Waste recycling machine
Grinding and mill crusher
Flotation cell machine
Magnetic separator
Laboratory mining plant
Â
Â
Â
Contact
The efficiency of the separator depends upon the strength of the magnet and the speed of the conveyor. The length of the magnet is designed such that the magnetic material is in the magnetic field for a period of 0.4 to 0.5 secs. Strontium Ferrite permanent blocks are used in the magnet assembly to achieve a surface gauss of 2500.
The gap between the magnet and the conveyor is adjustable. Lower the gap, better the separation efficiency. Individual drive is used for the separator and the conveyor. Adjustable stainless steel splitters are provided between the two chutes. Vibrating feeder with two unbalance motor is also provided, which ensures that the material spreads across the belt to achieve better separation. We can supply belt type separators for a belt width of 650 mm to 2000 mm.Classification of magnetic separatorDischarging Type of magnetic separator
--Air CoolingÂ
--Oil Cooling
--Fan Cooling
Operating Principle
The magnetic & nonmagnetic material is passed under the Magnetic Separator by a conveyor. The mixture is fed on to the conveyor evenly by the help of a feeder. Under the influence of the magnetic field the magnetic material is attracted upwards, towards the magnet face. The attracted material is carried along the cleated belt of the Separator and is continuously discharged in the magnet chute. The other material with is carried by the bottom conveyor and discharged in the non mag chute.
1. Excellent magnetic field intensity, Used to remove iron particles from material
Features of magnetic separation equipment
2. The wholly sealed structure makes the remover water-proof, dust-proof and corrosion resisting.
3. Low energy consumption.Application of belt electromagnetic separation
widely used in mining ore, limestone, hard coke, cement, chemicals, plastics, coal, refractory , building materials, food and other industries.
Components of magnetic separator
Sketch installation drawing of magnetic separator
Model Selection
1. Before choosing, you should pay attention to whether to convey the tape, bandwidth, inclination, material properties, humidity, and thickness, the amount of iron in the material, the nature of the ferromagnetic material, the requirements of iron removal and the environment used, etc. a kind
2.When there is more iron, you should choose RCDC, RCDD, RCDF series;
3.When the iron content is small, you should choose RCDA, RCDB, RCDE series;
4. When using suspended electric and permanent magnet iron remover, if the material is very thick, it can be used with the WCTG series of five parallel rollers, which can improve the iron removal rate and achieve the ideal iron removal effect;
5.When the material contained in the material cannot be adsorbed by the iron remover, the metal detector should be used to detect the metal, and the automatic iron removal should be performed after the automatic shutdown.
(mm)
(h≤mm)
(≥mT)
(≤mm)
(kw)
(≤m/s)
(kg)
Company Information
Our goal is to provide one-stop service for you and assist you to solve all problems from investment to his return in the field of mining, including the preliminary mineral analysis, mineral processing test, engineering design, equipment debugging and technical training etc..Â
We are expert especially at mining separating and lab mining plant, main products as below:
Gold trommel wash plant
Shaking table
Spiral chute separator
Centrifugal gold concentrator
Jig separator machines
Waste recycling machine
Grinding and mill crusher
Flotation cell machine
Magnetic separator
Laboratory mining plant
Â
Â
Â
Contact
Notable Characteristics:
Cost effective
Requires no consumables
High speed accuracy
Will mark any material (including hardened steel)
Model NO.: RCYD(C)-5
Energy Saving: Energy Saving
Warranty: 1 Year
Color: Multi Color
Customized: Non-Customized
Condition: New
OEM: Yes
Feeding Size: 0.074-2mm
Power: 0.55-1.1kw
Trademark: wkd
Transport Package: Carton
Specification: customer request
Origin: China
HS Code: 8474100000
Model NO.: RCYD(C)-5
Energy Saving: Energy Saving
Warranty: 1 Year
Color: Multi Color
Customized: Non-Customized
Condition: New
OEM: Yes
Feeding Size: 0.074-2mm
Power: 0.55-1.1kw
Trademark: wkd
Transport Package: Carton
Specification: customer request
Origin: China
HS Code: 8474100000